[Healeys] BJ8 back axle.

[richard mayor]

Here's a couple of photos.

On Sun, Jun 27, 2021 at 9:06 PM David Lodge via Healeys <
healeys at autox.team.net> wrote:

> Might anyone please have a photo with measurements of the metal circular
> flange/guide (?) which is riveted or spot-welded to the rear of the axle
> casing?
>
> As you can see, mine has gone walkabout and I would like a pop at making
> it myself.
>
> Also, there is a hole drilled in the top of the axle casing quite near the
> diff housing unlike the authentic breather at the opposite end.  Should I
> weld the hole
> up or weld another breather in its place?
>
> Thanks for any and all replies!
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/boyracer466@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210628/2f752225/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 2021-06-28 16.03.08.jpg
Type: image/jpeg
Size: 2673138 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20210628/2f752225/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 2021-06-28 16.02.48.jpg
Type: image/jpeg
Size: 2670487 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20210628/2f752225/attachment-0003.jpg>