[Healeys] Crankshaft Nut

[gradea1 at charter.net]

Michael-there is none. Use a big 1-1/2" wrench and tighten to a good
100lbs...tight. then bend the tab washer flat to hold the position.
Lock the crank with a block of wood (pan off) while tightening. Hank

	-----------------------------------------From: "Michael MacLean" 
To: "Ahealey help"
Cc: 
Sent: Saturday July 10 2021 9:00:15PM
Subject: [Healeys] Crankshaft Nut

 I can't seem to find the torque setting for the crankshaft nut at the
pulley for my BN2. Mike MacLean
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210711/a8204d93/attachment.htm>