[Healeys] Crankshaft Nut

[Michael Salter]

I don't think a torque is specified for that nut.
The factory tool is a "slugging wrench"
[image: image.png]
so very tight is what is required.
M

On Sat, Jul 10, 2021 at 11:59 PM Michael MacLean <springer.mike51 at gmail.com>
wrote:

> I can't seem to find the torque setting for the crankshaft nut at the
> pulley for my BN2.
> Mike MacLean
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210711/8f4877e5/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 527479 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20210711/8f4877e5/attachment-0001.png>