[Healeys] Choke question

[Kees Oudesluijs]

Before cutting, solder the wire with a high power soldering iron around 
the spot where you will cut.

Kees Oudesluijs



Op 9-1-2021 om 15:54 schreef Leonard Berkowitz:
> I have just reinstalled the carburetors on my BJ7 after replacing the 
> jet assemblies on both. I purchased new scuttle to carburetor choke 
> lines. Which installed fairly easily. Only problem is that both are 
> considerably longer than they need to be. That didn't present a 
> problem for the rear carb but the choke wire on the front was hitting 
> the horn and this interfered with the operation of the choke.  I tried 
> to cut the wire and it just unraveled and became unusable. Does anyone 
> have a suggestion on how to shorten the wire before or after it is 
> installed.
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210109/fddb4c6f/attachment.htm>