[Healeys] BN1 PCV system

[Michael Oritt]

Michael--

I certainly can't give you an opinion more qualified than your own but will
be interested to hear how it works out for you.

Best--Michael Oritt

On Sat, Jan 30, 2021 at 3:20 PM Michael Salter <michaelsalter at gmail.com>
wrote:

> After months of deliberation I have constructed this PCV system for my BN1.
> The original road draft tube has been plugged just below the PCV valve
> takeoff.
> Of importance was that the system would be almost impossible to see
> without very close inspection.
> I'm still trying to decide if I should plug the normal valve cover vent or
> leave it open to serve as the PCV system intake.
> Thoughts?
>
> M
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michael.oritt@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210201/5a69ecce/attachment.htm>