[Healeys] Centre Change Gear Sticks

[Michael Salter]

Pretty sure that the only change was the size of the ball upon which the
nylon bush rotates HOWEVER  there is a complication  ... there are nylon
bushes, from an MGB as I recall, which can be used with the lever with the
smaller ball end.

M

On Wed., Dec. 1, 2021, 8:21 a.m. Simon Lachlan via Healeys, <
healeys at autox.team.net> wrote:

> Hi,
>
> I have a late Mk II BT7. Centre change. So, my query is regarding the
> gearstick.
>
> The box is a BMC Goldseal replacement per the attached picture.
>
> The stick has the two roll pins securing it which you’d expect up to BJ8s
> which, I gather, had screws. But the bush under the stick in the white
> nylon one which, I gather again, started with BJ8s. (To be fair, I’ve
> looked into this and didn’t find a definitive answer on the bushes). My
> gearbox seems to be a bit of a BT7/BJ8 mixture.
>
> My question is can you put a roll-pin gearstick into a BJ8? Or vice-verca?
>
> Thanks,
>
> Simon
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20211201/95d13967/attachment.htm>