[Healeys] jack handles - again!

[Curtis Arndt]

I forgot, the Shelley LJ 225 jack is the early model without the
reinforcing collar.  Applicable to 3000s from around mid 1960 to around
1964.

On Tue, Oct 6, 2020 at 8:26 AM Curtis Arndt <cnaarndt at gmail.com> wrote:

> Mirek,
>
> Good timing, I am in the process of selling four original AH jacks with
> handles and bags as applicable, *all restored to Concours condition*.
>
> 1.)  Shelley 6INCH with original handles, and oil cloth bags made by a
> member of the Concours committee.
> 2.)  Shelley LJ 23 54  with reproduction handles (made by a member of the
> Concours committee), and leather cloth bags made by Rightway Heritage
> Trimming.
> 3.)  Shelley LJ 23 54  with reproduction handles (made by a member of the
> Concours committee), and leather cloth bags made by Rightway Heritage
> Trimming.
> 4.)  Shelley LJ 225 with the straight 18" zinc plated hanlde
>
> I'm also selling a very nice reproduction set of the Shelley LJ 21 jack
> handles, also Concours correct.  I also have 2/3 of an original set that
> I'm trying to complete and sell.
>
> *The two handle pieces for the LJ 21 / B.1881 jacks are 14" long, and the
> round cross handle is 12 " long.*
>
> *Cheers,*
>
> *Curt*
> *AH Concours Technical Committee*
>
>
>
>
> On Tue, Oct 6, 2020 at 7:54 AM m.g.sharp--- via Healeys <
> healeys at autox.team.net> wrote:
>
>> ! cannot determine the length of the jack handles for an early BT7.
>>
>>
>>
>> Photo 25 in Supplement 7 of the Concours Guide indicates the correct jack
>> for my BT7 (build date October 1959) is the King Dick B. 1881.  The caption
>> says the KD 1881 and Shelley LJ21 jacks used the same handles, which are
>> illustrated but there is no scale and the lengths are not provided.  Photo
>> 18 in the supplement shows the Shelley LJ21 and 3 sets of jack handles, the
>> bottom set being for the LJ21, which should therefore be the correct ones
>> for the KD B. 1881 as well.  The caption provides the lengths for the other
>> two sets of handles, but not the handle length for the LJ21!  The text does
>> not provide  the lengths either.  The bottom set in Photo 18 look to be
>> intermediate between the other two sets, perhaps around 18”?
>>
>>
>>
>> Does anyone have a set of handles that are correct for the Shelly
>> LJ21/King Dick B. 1881 that they could measure the lengths of for me?  This
>> would be a useful addition to the next version of the guide.
>>
>>
>>
>> With thanks, Mirek
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>>
>> Archive: http://www.team.net/pipermail/healeys
>> http://autox.team.net/archive
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/cnaarndt@gmail.com
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20201006/e241a9c3/attachment.htm>