[Healeys] Brake sleeve Bleeder extention.

[Jean Caron]

Dennis,
If you want to make one of these, I also have the pattern from one that Doug Reid sold, but I believe that David Nock also sells a model of an extension.

Jean

Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

From: Robert Begani<mailto:rfbegani at gmail.com>
Sent: May 24, 2020 10:46 AM
To: 'Bob Spidell'<mailto:bspidell at comcast.net>; healeys at autox.team.net<mailto:healeys at autox.team.net>
Subject: [Healeys] Brake sleeve Bleeder extention.

One of the best addon items to my AH.  Was able to obtain one 3 years ago from one on our members as there seems to be no maker any longer.

Bob Begani

From: Healeys <healeys-bounces at autox.team.net> On Behalf Of Bob Spidell
Sent: Sunday, May 24, 2020 11:16 AM
To: healeys at autox.team.net
Subject: Re: [Healeys] Clutch Low Engagement

Forgot the photo.
On 5/24/2020 8:14 AM, Bob Spidell wrote:
The obvious, most likely problem is air in the clutch line.  Start with a good bloodletting of the clutch circuit. Unfortunately, this is a pain, and often gets, uh, 'overlooked' because the bleed screw on the slave cylinder is nigh impossible to reach without removing the transmission tunnel (or dropping the slave cylinder).  Some of us have installed bleeder extensions; this one is from the late Doug Reid--'Mr Finespanner'--which is unfortunately NLA (you might get lucky on eBay). I bled my clutch once in a Texas Roadhouse parking lot waiting for it to open.

Bob
On 5/24/2020 4:55 AM, Dennis Gavin wrote:
What are the causes & remedies for low clutch engagement? I have a 63 BJ7 and the clutch now engages very close to the floor. This groups’ help is most appreciated.

Dennis Gavin
Centerville, MA
63 BJ7





-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200524/c857d2c2/attachment.htm>