[Healeys] Denis Welch 100M Manifolds

[Kees Oudesluijs]

Metric M8?

Kees Oudesluijs



Op 24-5-2020 om 00:43 schreef Michael MacLean:
> Anyone install Denis Welch 100M intake manifolds on their 100?  I 
> bought these from a late friend several years ago and did not try to 
> install them until this week.  A couple of complaints.  The balance 
> pipe studs are not all the same.  Two have different length thread 
> than the other two.  Not a tragedy, but for the cost of these things 
> you would expect better.  Second, the manifold to carb studs are very 
> long.  I can't seem to figure out why that is.  These studs did not 
> come with the nuts either.  So far I have tried BSF and UNF nuts and 
> can only get 2 to 3 turns then either nut stops.
>
>
>   What thread and size should they be.  I bought a set of 8 nuts for a 
> regular 100 intake manifold (H4), but they are too big. Pardon the 
> pun, but i am going nuts trying to figure out all the different 
> fasteners on this engine/car and what threads are used in the newer 
> replacement parts like this Denis Welch designed manifold.
> Mike MacLean
>
> Sent from AT&T Yahoo Mail on Android 
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200524/e519ba7e/attachment.htm>