[Healeys] SU carb fuel pressure

Michael Oritt michael.oritt at gmail.com
Sun Jun 14 11:45:29 MDT 2020


Gary--

2 to 4 psi is the common wisdom.

That said, I had a set of HS6's on the MGA engine in my (now-gone) Elva
Courier and no amount of fiddling with floats, lid position, etc. would
solve a consistent fuel starvation problem when coming of hard, tight
right-handers under full throttle as in turns 1 at VIR, Summit Point, etc.
 I finally solved the problem by installing a Holly Blue (high-pressure
fuel pump) and reducing pressure via a regulator to about 5.5-6 psi.  Dire
predictions notwithstanding I never had an issue  with the floats' being
overcome by that pressure and causing leaking.

I'm not saying anyone should go to such extremes without a good reason but
I think the "common wisdom" is just that and not always gospel.

Best--Michael Oritt

On Sun, Jun 14, 2020 at 12:27 PM warthodson--- via Healeys <
healeys at autox.team.net> wrote:

> What is the Max recommended fuel pressure (psi) for SU HS 6  Carbs. Is
> there  also a Min fuel pressure?
> Gary Hodson
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michael.oritt@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200614/8b0eab26/attachment.htm>


More information about the Healeys mailing list