[Healeys] The same but different

[Michael Salter]

Those MGs always were a bit loosey goosey 🤣🤣

On Mon., Jun. 8, 2020, 3:16 p.m. Bob Haskell, <rchaskell at earthlink.net>
wrote:

> Listers,
>
> I'm going going through the brakes and front hubs on our 1980 MGB.  The
> front hubs use the same bearings and shims as the later BJ8s. It's
> interesting (to me at least) that the MGB workshop manual states that
> you want 2 to 4 thousandths of an inch end float.  The Austin-Healey
> workshop manual states that you want to remove the end float.
>
> Cheers,
>
> Bob Haskell
> Austin Healey 3000 BN7/BT7 registrar
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200608/60a439ae/attachment.htm>