[Healeys] The same but different

[Bob Haskell]

Listers,

I'm going going through the brakes and front hubs on our 1980 MGB.  The 
front hubs use the same bearings and shims as the later BJ8s. It's 
interesting (to me at least) that the MGB workshop manual states that 
you want 2 to 4 thousandths of an inch end float.  The Austin-Healey 
workshop manual states that you want to remove the end float.

Cheers,

Bob Haskell
Austin Healey 3000 BN7/BT7 registrar