[Healeys] HS4 Tri-carb tuning

warthodson at aol.com warthodson at aol.com
Tue Jul 7 07:27:02 MDT 2020

I read the instructions & found a missing portion of a sentence. See Adjustments,  (2) Tuning, paragraph 2, last line reads as follows: "adjusted vertically by nut (2, Fig. 1) that for this given" - the remainder of this sentence is missing. Anyone know what it should say?Gary Hodson

-----Original Message-----
From: John Spaur via Healeys <healeys at autox.team.net>
To: rwil at sbcglobal.net; healeys at autox.team.net
Sent: Mon, Jul 6, 2020 7:26 pm
Subject: Re: [Healeys] HS4 Tri-carb tuning

I should have given a reference. It is from the S.U Burlen website, this
page, right hand side, last paragraph before the carb section image:

It does not flood the carb, it leans it out to the stall point. No, it is
not way out of normal, it is a test to determine if the carb mixture is

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200707/97b88f34/attachment.htm>

More information about the Healeys mailing list