[Healeys] Front Shroud

[David Masucci]

Hi Healey folks,

It’s been a while. I started the restoration of my BJ8 back in 2012 or so. I just spent the last year and a half moving to a new home 10 miles from the old. The move took months to move a barn full of car stuff to my new garage. Then months to set up the garage and basement work areas. 

FINALLY I’m back to working on the car!! When I left the old house it was finally a running car again, it just didn’t have a body. The front shroud had minor to moderate damage at each headlight area that dates back to before my Dad bought the car (his 3rd Healey) in the early 1980s.  Since both sides have some remaining damage, I don’t know which side (if either) is correct. The area of concern is the area below the headlights. 

Does anyone have any templates or other means to confirm or not that I have the correct contours?

Thanks All,
Dave Masucci

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200128/90dbe903/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20200126_150104.jpeg
Type: image/jpeg
Size: 89574 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20200128/90dbe903/attachment.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20200126_150110.jpeg
Type: image/jpeg
Size: 89452 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20200128/90dbe903/attachment-0001.jpeg>