[Healeys] Bulb holder issue
michaelsalter at gmail.com
Tue Nov 26 15:57:18 MST 2019
I have had some success in removing the bulb after pulling gently on 2 of
the wires behind, not including the ground wire. So doing helps in pressing
the bulb in allowing it to rotate.
On Tue, Nov 26, 2019, 4:56 PM Michael Oritt, <michael.oritt at gmail.com>
> I have been struggling with the removal/replacement of the halogen
> taillight bulbs on my car. I simply cannot get q good enough grip on the
> bulb to push/turn and remove it from the bayonet socket. Unlike later cars
> the glass lens on the 100 is almost flat, the bulb is straight with no
> shoulder and does not project very far beyond the surface of the
> I'm sure there is a trick here--can anyone share it with me?
> Best--Michael Oritt
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/pipermail/healeys
> Healeys at autox.team.net
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Healeys