[Healeys] wtb: oil line L-shaped bracket

[Bob Spidell]

Wow.  I've never seen that bracket on /any /Healey.

Now, I gotta have one.

bs


On 6/26/2019 6:33 PM, Bob Haskell wrote:
> Listers,
>
> I'm looking for the L-shaped bracket pictured in the attached photo.  
> It attaches to the firewall using one of the screws that holds the 
> firewall insulation in place.  On the other end has a P-clip that 
> holds the oil pressure gauge line.
>
> The photo is from one of Moss' firewall insulation installation 
> instructions.  The instructions have two photos that show the bracket, 
> one for a BN7 MkII and one BJ8.
>
> The bracket is not shown or listed in the factory parts manual I have. 
> It looks like the P clip might be listed.  PCR0307 introduced at car 
> 13751, which is the first tri-carb.
>
> I've checked with a few of the usual suspects (BSC, Healey Surgeons, 
> Kilmartin, AH Spares) and haven't had any luck. Suggestions?
>
> Looks like it would be easy enough to make, but would like to have one 
> in hand to get the dimensions off of.
>
> Cheers,
>
> Bob Haskell
> Austin Healey 3000 BN7/BT7 registrar 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190626/2129a751/attachment.html>