[Healeys] wtb: oil line L-shaped bracket

[Graeme Molony]

I echo the comments Bob.

Just had a look at my BJ8 parts manual.

No sign of it

Graeme M


From: Bob Spidell 
Sent: Thursday, June 27, 2019 12:11 PM
To: healeys at autox.team.net 
Subject: Re: [Healeys] wtb: oil line L-shaped bracket

Wow.  I've never seen that bracket on any Healey.  


Now, I gotta have one.

bs



On 6/26/2019 6:33 PM, Bob Haskell wrote:

  Listers, 

  I'm looking for the L-shaped bracket pictured in the attached photo.  It attaches to the firewall using one of the screws that holds the firewall insulation in place.  On the other end has a P-clip that holds the oil pressure gauge line. 

  The photo is from one of Moss' firewall insulation installation instructions.  The instructions have two photos that show the bracket, one for a BN7 MkII and one BJ8. 

  The bracket is not shown or listed in the factory parts manual I have. It looks like the P clip might be listed.  PCR0307 introduced at car 13751, which is the first tri-carb. 

  I've checked with a few of the usual suspects (BSC, Healey Surgeons, Kilmartin, AH Spares) and haven't had any luck.  Suggestions? 

  Looks like it would be easy enough to make, but would like to have one in hand to get the dimensions off of. 

  Cheers, 

  Bob Haskell 
  Austin Healey 3000 BN7/BT7 registrar 


--------------------------------------------------------------------------------
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/gmolony1@bigpond.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190627/42f2f830/attachment.html>