[Healeys] Towing a Healey Flat
R. Lindsay
050.rpl at gmail.com
Sun Jun 9 16:05:17 MDT 2019
If you were to hit a good sized hole the shake may cause the trans to shift into gear. I’d rather be safe than have to rebuild a transmission or rear end. Just sayin’.
Price Lindsay
Cell: 630-841-6300
Email: 050.rpl at gmail.com
Sent from my iPhone
> On Jun 9, 2019, at 5:57 PM, Robert Begani <rfbegani at gmail.com> wrote:
>
> Hi Jerry:
>
> Attached is a picture of the attachment to the frame I found. Uses existing frame bolts so I can simply unbolt it and drive around without problems. Will consider the idea of replacing the bumper with a channel. As kees just commented the trans and overdrive along with the differential are bathed in oil so I cannot understand why I have to disconnect the drive shaft. Then again Price reminds me of the one that shifted into gear.
>
>
> Bob
>
> From: cjerryadams at yahoo.com <cjerryadams at yahoo.com>
> Sent: Sunday, June 9, 2019 5:39 PM
> To: Robert Begani <rfbegani at gmail.com>
> Subject: Re: [Healeys] Towing a Healey flat
>
> I towed BN2 to Columbus Ohio and back to Dallas/Ft Worth area flat. I replaced front bumper with 3”-4” channel so not to bend bumper. I did disconnect drive shaft so not to damage OD. Better safe than sorrys
>
> Sent from my iPhone
>
>
> <austin healey tow bar .jpg>
> <austin healey tow bar 1 .jpg>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/050.rpl@gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190609/4ef69718/attachment.html>
More information about the Healeys
mailing list