[Healeys] Anti-Sway Bar

[Michael Salter]

I concur with Curt.
I suspect that you have bearings (bushes) for the 6 cyl (M) anti-roll bar.

M


On Tue, Jul 23, 2019, 7:24 AM Curtis Arndt, <cnaarndt at gmail.com> wrote:

> Mike,
>
> Off the top of my head, I believe that BN1/2 sway bars were 1/2"in
> diameter and that 100M sway bars were larger, I think 5/8" diameter, the
> same as the six-cylinder cars.
>
> Curt
>
> On Mon, Jul 22, 2019 at 9:44 PM Michael MacLean <rrengineer.mike at att.net>
> wrote:
>
>> What is the diameter of a 100 anti-sway bar?  I just tried to put
>> urethane bushings on the one I have with my BN2 (the two center ones held
>> on with a metal strap) and the hole in the bushing was way too big.  What
>> good is that?  I switched to a rubber set I have and they fit better, but
>> still a little loose.
>> Mike MacLean
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>>
>> Archive: http://www.team.net/pipermail/healeys
>> http://autox.team.net/archive
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/cnaarndt@gmail.com
>>
>> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190723/91d53e0a/attachment.html>