[Healeys] Anti-Sway Bar

Tue Jul 23 07:16:40 MDT 2019

Mike, 

They can be 5/8", 3/4" or 7/8". 

Regards, 

Charlie 

----- Original Message -----

From: "Michael MacLean" <rrengineer.mike at att.net> 
To: "Healeys" <healeys at autox.team.net> 
Sent: Monday, July 22, 2019 11:43:41 PM 
Subject: [Healeys] Anti-Sway Bar 

What is the diameter of a 100 anti-sway bar? I just tried to put urethane bushings on the one I have with my BN2 (the two center ones held on with a metal strap) and the hole in the bushing was way too big. What good is that? I switched to a rubber set I have and they fit better, but still a little loose. 
Mike MacLean 

_______________________________________________ 
Support Team.Net http://www.team.net/donate.html 
Suggested annual donation $12.75 

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive 

Healeys at autox.team.net 
http://autox.team.net/mailman/listinfo/healeys 

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/schottc@knology.net 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190723/f7283c09/attachment.html>