[Healeys] Anti-Sway Bar

[Curtis Arndt]

Mike,

Off the top of my head, I believe that BN1/2 sway bars were 1/2"in diameter
and that 100M sway bars were larger, I think 5/8" diameter, the same as the
six-cylinder cars.

Curt

On Mon, Jul 22, 2019 at 9:44 PM Michael MacLean <rrengineer.mike at att.net>
wrote:

> What is the diameter of a 100 anti-sway bar?  I just tried to put urethane
> bushings on the one I have with my BN2 (the two center ones held on with a
> metal strap) and the hole in the bushing was way too big.  What good is
> that?  I switched to a rubber set I have and they fit better, but still a
> little loose.
> Mike MacLean
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/cnaarndt@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190723/d81ebc4d/attachment.html>