[Healeys] Anti Sway Bar Straps

[Bob Spidell]

Think you're right ... got the screws and bolts mixed-up.

On 7/20/2019 1:03 PM, Neil Anderson wrote:
> I believe that would be 3/8" - 24 tpi.
>
> https://www.boltdepot.com/fastener-information/measuring/us-tpi.aspx
>
> Neil Anderson
>
> On Sat, Jul 20, 2019 at 2:44 PM Bob Spidell <bspidell at comcast.net 
> <mailto:bspidell at comcast.net>> wrote:
>
>     3/8" Fine (32 TPI), same as motor mounts, shocks, bumper bracket
>     bolts, etc.  If you only own two taps and dies, get 3/8"-32 and
>     #10-32.  Healeys are held together with about 99% 3/8"-32 and
>     #10-32 screws.
>
>
>     On 7/20/2019 12:18 PM, Michael MacLean wrote:
>>     The Moss catalog does not list the four bolts for the bushing
>>     straps that bolt the bushings to the frame rails on a BN1/2. 
>>     Anyone know what thread this is?  Before I go jamming a UNF bolt
>>     in there.
>>     Mike MacLean
>>
>     _______________________________________________
>     Support Team.Net http://www.team.net/donate.html
>     Suggested annual donation  $12.75
>
>     Archive: http://www.team.net/pipermail/healeys
>     http://autox.team.net/archive
>
>     Healeys at autox.team.net <mailto:Healeys at autox.team.net>
>     http://autox.team.net/mailman/listinfo/healeys
>
>     Unsubscribe/Manage:
>     http://autox.team.net/mailman/options/healeys/neilandcustom@gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190720/789578e3/attachment.html>