[Healeys] Anti Sway Bar Straps

Sat Jul 20 14:51:37 MDT 2019

 OK, so you all saying this is a UNF thread, NOT a BSF thread?  The only reason I ask is all the bolts to mount the steering idler and steering box are BSF.
Mike M

    On Saturday, July 20, 2019, 1:08:51 PM PDT, Bob Spidell <bspidell at comcast.net> wrote:  

Think you're right ... got the screws and bolts mixed-up.

 On 7/20/2019 1:03 PM, Neil Anderson wrote:

  I believe that would be 3/8" - 24 tpi. 
  https://www.boltdepot.com/fastener-information/measuring/us-tpi.aspx 
  Neil Anderson

  On Sat, Jul 20, 2019 at 2:44 PM Bob Spidell <bspidell at comcast.net> wrote:

3/8" Fine (32 TPI), same as motor mounts, shocks, bumper bracket bolts, etc.  If you only own two taps and dies, get 3/8"-32 and #10-32.  Healeys are held together with about 99% 3/8"-32 and #10-32 screws.

 On 7/20/2019 12:18 PM, Michael MacLean wrote:

  The Moss catalog does not list the four bolts for the bushing straps that bolt the bushings to the frame rails on a BN1/2.  Anyone know what thread this is?  Before I go jamming a UNF bolt in there. 
  Mike MacLean

  _______________________________________________
 Support Team.Net http://www.team.net/donate.html
 Suggested annual donation  $12.75

 Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

 Healeys at autox.team.net
 http://autox.team.net/mailman/listinfo/healeys

 Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/neilandcustom@gmail.com

  _______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rrengineer.mike@att.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190720/53e6ed41/attachment.html>