[Healeys] Anti Sway Bar Straps

Neil Anderson neilandcustom at gmail.com
Sat Jul 20 14:03:25 MDT 2019


I believe that would be 3/8" - 24 tpi.

https://www.boltdepot.com/fastener-information/measuring/us-tpi.aspx

Neil Anderson

On Sat, Jul 20, 2019 at 2:44 PM Bob Spidell <bspidell at comcast.net> wrote:

> 3/8" Fine (32 TPI), same as motor mounts, shocks, bumper bracket bolts,
> etc.  If you only own two taps and dies, get 3/8"-32 and #10-32.  Healeys
> are held together with about 99% 3/8"-32 and #10-32 screws.
>
>
> On 7/20/2019 12:18 PM, Michael MacLean wrote:
>
> The Moss catalog does not list the four bolts for the bushing straps that
> bolt the bushings to the frame rails on a BN1/2.  Anyone know what thread
> this is?  Before I go jamming a UNF bolt in there.
> Mike MacLean
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/neilandcustom@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190720/769d4f6e/attachment.html>


More information about the Healeys mailing list