[Healeys] Pump Location

[Bob Spidell]

Mike,

I'm working from memory but, for once it's working pretty good. The pump 
goes into the two holes on the right, the one with the red arrow and the 
un-arrowed hole.  The two marked with blue arrows are aftermarket (and 
one is strangely oblonged; I doubt the bean counters at BMC would 
authorize such an elaborate hole).

I remember because my BN2 had only those two holes and I had to stack 
flat washers to give the pump a flat base due to the embossing on the 
bulkhead.

Bob

On 7/1/2019 9:27 PM, Michael MacLean wrote:
> I am trying to install the fuel pump to  my BN2.  The back wall behind 
> the seats where it is located has a Swiss cheese quality about it.  
> There are too many holes back there.  Can someone please tell me from 
> looking at the picture, if the two pump mounting screws should go in 
> the holes below the blue arrows or the blue and red arrows.  I'm 
> leaning on the blue arrows because in the middle of the red and blue 
> arrows is a raised ledge and that doesn't' seem right. Those are the 
> only choices with the correct spacing for the two mounting screws on 
> the pump.
> Mike MacLean
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190701/344923f4/attachment.html>