[Healeys] Turn Signal Bulbholder
healeybruce at roadrunner.com
Mon Dec 9 12:41:36 MST 2019
That’s what’s in my BN7.
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of i erbs
Sent: Monday, December 09, 2019 10:06 AM
To: Michael MacLean <rrengineer.mike at att.net>
Cc: Healeys <healeys at autox.team.net>
Subject: Re: [Healeys] Turn Signal Bulbholder
The holder you got would fit my late BN4 nicely.
1959 Austin Healey BN4
On Mon, Dec 9, 2019, 9:49 AM Michael MacLean <rrengineer.mike at att.net <mailto:rrengineer.mike at att.net> > wrote:
In retrofitting an early two piece dash to my BN2 I have run into a snag with the turn signal indicator light assembly. The light assembly I bought from one of the usual suspects is a two piece affair. It has a very nice external threaded chrome bezel and an internal threaded green tube with a sort of lens coming up through the center and protruding into the bezel. This would be fine if it was mounted to a one piece dash, but as you can see in the picture the mounting hole is not centered in relation to the sheet metal above and behind the instrument panel. Easy enough, just grind away until it fits. This brings up another question. If I didn't want to bugger up an original early two piece dash, what did the early light bulbholder fitting that would fit here look like?
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys at autox.team.net <mailto:Healeys at autox.team.net>
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Healeys