[Healeys] Valve Clearances for an M continued

[Bob Spidell]

Then 0.015" is the 'safe' gap; that's what DWR calls for the DWR1 
'slightly better than stock' BJ8 cam.

Also check the cam timing.

Bob

On 8/22/2019 10:35 AM, Steven Kingsbury wrote:
> Thanks Bob,
>    I was told this cam is a bit more "hot" than an M cam, and trying 
> to retrace steps from the previous owner has been fun to say the 
> least. I am going to check all the clearances as they sit right now 
> and not make any adjustments until I know what is there. Updates to 
> follow and right now I'm still a bit in limbo land, but will emerge 
> soon with more to report.
>    Thanks and stay tuned!
> Steven
>
> On August 22, 2019 at 10:18 AM, Bob Spidell <bspidell at comcast.net> wrote:
>
>> I set our factory 100M's to 0.012" per the manual.  I don't think the
>> 'M' cam is all that hot.
>>
>> Bob
>>
>> On 8/21/2019 10:16 PM, Steven Kingsbury via Healeys wrote:
>>> Thanks for the responses. The combined wisdom of the folks responding
>>> was unanimous, 0.015. So I will check everything and then I will
>>> adjust accordingly. Thanks to everyone!
>>> Steven
>>>
>>
>> _______________________________________________
>> Support Team.Net <http://Team.Net> http://www.team.net/donate.html
>> Suggested annual donation $12.75
>>
>> Archive: http://www.team.net/pipermail/healeys 
>> http://autox.team.net/archive
>>
>> Healeys at autox.team.net <mailto:Healeys at autox.team.net>
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage: 
>> http://autox.team.net/mailman/options/healeys/airtightproductions@icloud.com
>>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190822/c4cb7a98/attachment.html>