[Healeys] Valve Clearances for an M

[i erbs]

.015 with a hotter cam. Check the archives, quite a bit of chatter on this
a few months back.

Ira Erbs
Portland, OR
typos and artifacts are the fault of my phone

On Wed, Aug 21, 2019, 6:56 PM Steven Kingsbury via Healeys <
healeys at autox.team.net> wrote:

> OK folks, I know the setting for valve clearances on a 100 is 0.012, but
> when a hotter cam gets put in to a 100 with larger carbs and different
> pistons, does it stay 0.012? I am going to check all of the clearances on
> the set up as it sits now before I do any adjusting of anything, but
> thought I would run this by everyone before I touch or move anything.
> Thanks in advance.
>    And just as an update, I got the OA6 Rich needles in now, I brought
> both jets up in the carbs evenly and then let them back down 12 flats each,
> so I've now got a base line to work with. I am re-installing the alternator
> conversion that was Mickey Moused into position with the Moss/AH Spares
> kit, which is quite nice nice and then I also just got a Snap On timing
> light so I can set the advance accurately. It's coming along, slowly, but
> that's okay, I'm in no big hurry, I just want it right as I plan on driving
> the wheels off of this car.
>    Thanks again for any information you might pass along!
> Steven Kingsbury
> Hopped Up BN1
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/eyera3000@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190821/9d4b306c/attachment.html>