[Healeys] Different Rear Hubs

[Michael MacLean]

 It's already been suggested I just cut or grind the excess off.Mike MacLean

    On Wednesday, August 14, 2019, 10:30:17 AM PDT, josef-eckert at t-online.de <josef-eckert at t-online.de> wrote:  
 
 
Mike,


The hub with the long studs is for a disk  wheel car.

Josef Eckert

Gernany

 

 

 

-----Original-Nachricht-----

Betreff: [Healeys] Different Rear Hubs

Datum: 2019-08-14T15:11:40+0200

Von: "Mike MacLean" <rrengineer.mike at att.net>

An: "healeys at autox.team.net" <healeys at autox.team.net>

 

 

 
I am finishing up the differential, suspension and brakes for my BN2.  I knew early in the restoration I had two different rear hubs.  I am not sure what hub belongs on which model or when they changed, but it is evident the two I have were from two different differentials.  I don't think that presents a problem.  I just installed the brake drums and extended splined hubs tonight.  The wheel studs on one side only stick out from the nuts by a few threads.  The other side the studs stick out 3/8" to 1/2".  Will this present any problems?  I am using Dayton 48 spoke wire wheels.Mike MacLean  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190814/6d12d541/attachment.html>