[Healeys] BJ8 Flasher Relay

[WILLIAM B LAWRENCE]

Not necessarily Banjo. I'm not sure that all BJ8s are set up that way since most of them have separate stop and turn signal lamps. I took the cue from the existence of a flasher relay.

Bill Lawrence
BN1 #554
________________________________
From: banjojohn <banjojohn at cox.net>
Sent: Wednesday, April 17, 2019 3:27 AM
To: WILLIAM B LAWRENCE; Randy Hicks; Healey List
Subject: Re: [Healeys] BJ8 Flasher Relay

Ok.  I may have jumped the gun on my response.  I was thinking we were talking about the flasher unit vs. the flasher relay box.
I will retreat to the shadows and watch the wisdom of the list take over

John



Sent from my Sprint Samsung Galaxy S7.

-------- Original message --------
From: WILLIAM B LAWRENCE <ynotink at msn.com>
Date: 4/16/19 10:03 PM (GMT-06:00)
To: John <banjojohn at cox.net>, Randy Hicks <healey100m at me.com>, Healey List <healeys at autox.team.net>
Subject: Re: [Healeys] BJ8 Flasher Relay

I have to disagree. The wiring diagram I have (BN1/2) shows the left front turn lamp connected to terminal #2 on the relay while the left rear is connected to terminal #3. They have to be split that way so the front directional lamps don't illuminate with the brake lights.

Bill Lawrence
BN1 #554
________________________________
From: Healeys <healeys-bounces at autox.team.net> on behalf of John <banjojohn at cox.net>
Sent: Tuesday, April 16, 2019 10:36 PM
To: Randy Hicks; Healey List
Subject: Re: [Healeys] BJ8 Flasher Relay

I would do some more research on your problem.  a flasher unit does not
send it's signal to each light separately, so if your rear signal is
working, or if the signals to the right are working, then your flasher
is working.  you may have a problem with the contacts in the bulb
socket, a bad connection to the socket somewhere, or simply have a bad bulb.

Good luck

John O'Brien

'61 Bugeye (Lucy)

'65 BJ8 (Madelyn)

On 4/16/2019 3:08 PM, Randy Hicks via Healeys wrote:
> I have a front left directional out and have traced it back to a bad Flasher relay.
>
> Any recommendations on a replacement? (It is soooo easy to get to!!!) 😀
>
> Anyone used the Moss Solid State unit?
>
> TIA,
>
> Randy
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/banjojohn@cox.net
>
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/ynotink@msn.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20190417/31b48c93/attachment.html>