[Healeys] Adjusting generator belt

jim ab7vf at yahoo.com
Sun Sep 30 11:57:09 MDT 2018


Back in the old days, we tightened the belt just tight enough so you couldn't "hook" your little finger on the cooling fins and NOT rotate the generator against the friction of the drive belt ...Adjust loose and pull on the gen...tighten -some- ..hook again ...etc

too tight eats bearings ..too lose squeals

Jim
 

    On Saturday, September 29, 2018, 4:49:12 PM PDT, BJ8Healeys <sbyers at ec.rr.com> wrote:  
 
 
I second what Mike says.  Way back when I first got my BJ8 and didn't know what I was doing, I installed a new fan felt and got it really tight (the way I thought it should be).  Drove 300 miles and the generator bearings crapped out.  It took me three days in Washington, DC to find a shop that could fix it.

Healey Surgeons sent me a new one, but it wouldn't fit and it's all they had.  I'm pretty sure it was the tight belt that ruined the bearings -- or at least, shortened their life.

  

You really only need to get the belt tight enough not to slip on the pulleys.

  

Steve Byers

HBJ8L/36666

BJ8 Registry

AHCA Delegate at Large

Havelock, NC  

  

  

From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Michael Salter
Sent: Saturday, September 29, 2018 4:03 PM
To: healeys at autox.team.net; Frank Magnusson
Subject: Re: [Healeys] Adjusting generator belt

  

Actually Frank you don't really want the belt too tight.

With the bolts (all 4) loosened a little, pulling up hard on the generator body is sufficient. 

The trick however, is to tighten the slide bolt on the underside of the generator while you pull up on the generator. 

M

From: Healeys <healeys-bounces at autox.team.net> on behalf of Frank Magnusson <fmags at cox.net>
Sent: Saturday, September 29, 2018 2:21:12 PM
To: healeys at autox.team.net
Subject: [Healeys] Adjusting generator belt 

 

Hello once again.

Just got my generator back on and cannot seem to get the belt tightened.  Thought I used a big pry bar from above, but it keeps hitting the valve cover.  Do not think I did it from underneath last time.  Its been awhile and cannot recall.  I really am not *that* old, lol!  

What do you guys use?

Thanks,
Frank
'65 BJ 8





_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/ab7vf@yahoo.com

  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20180930/d1c22482/attachment.html>


More information about the Healeys mailing list