[Healeys] Adjusting valves; dog nut on crank

[Michael Salter]

[Image]


Frank you may find it easier to put the gearbox into 4th gear then nudge the car back or forward to turn the engine.
1   11/16 is a loose fit.
________________________________
From: Healeys <healeys-bounces at autox.team.net> on behalf of Frank Magnusson <fmags at cox.net>
Sent: Thursday, September 27, 2018 11:19:31 AM
To: healeys at autox.team.net
Subject: [Healeys] Adjusting valves; dog nut on crank

I'm just starting adjusting the valves on myBJ8 and can't seem to find a wrench of the right size for the dog nut on the crankshaft.  I have a large crescent wrench but its too thick to get in there.  Does anybody know the correct size wrench to fit that nut?

If I remember. Right, It looks like the last time I adjusted the valves, I used a large tapered drift to engage the dog ears on the nut, which seems to work fine.  Just curious what everyone else uses.

Thanks,
Frank
'65 BJ 8

Sent from my iPad
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20180927/b1b1c385/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Img_180927132255123-1.jpg
Type: image/jpeg
Size: 497722 bytes
Desc: Img_180927132255123-1.jpg
URL: <http://autox.team.net/pipermail/healeys/attachments/20180927/b1b1c385/attachment.jpg>