[Healeys] Reversing light wiring

[Per Schoerner]

I have a side shift gearbox here that have a hole in the bellhousing just outside the aperture where the selector rods come out from the gearbox. The selector rod for reverse quite conveniently have a conical tip that will fit a reverse switch just fine, the switch being the same thing as the overdrive switch or very similar.
Is it possible that the selector rod on a center shift also is conical at the front tip, if so a switch could possibly be installed in the same manner.

Per

Skickat från min iPhone

> 21 sep. 2018 kl. 11:59 skrev <simon.lachlan at alexarevel.plus.com> <simon.lachlan at alexarevel.plus.com>:
> 
> Hi,
> I’m thinking about fitting a reversing light to my 3000.
> I was hoping to have it switched by the selection of reverse gear.
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20180921/c55463d1/attachment.html>