[Healeys] Healeys Digest, Vol 11, Issue 325

sentenac.rw at gmail.com sentenac.rw at gmail.com
Wed Oct 24 18:32:33 MDT 2018


With respect to all, and respectfully, I suggest that we all
understand that the term cloisonne refers to the use of wire to make a
pattern which is soldered to a flat bed.  The wire is usually gold or
silver.  The 'filler' material, in the case of Healeys the red stuff
(at least for most of the pre-BJ series Healeys), is vitreous enamel.
It is fired in place, not simply sprayed on.  It is somewhat similar
to the 'enamel' that is used in enamelware baking dishes and older
cast iron bathtubs, and not closely related to paint.  For Healey
badges the red stuff is in depressions cast into the badge, not
created with wire.

-Roland
BN1 #724 about to be launched onto public highways for the first time
since 1964



On Wed, 24 Oct 2018 16:05:59 -0400, you wrote:

>With all due respect, Curt, how about showing some respect — if you’re so smart now why didn’t you make this correction in all the years you were chairman of concours.
>
>Gary Anderson 
>
>
>> On Oct 24, 2018, at 2:00 PM, healeys-request at autox.team.net wrote:
>> 
>> Send Healeys mailing list submissions to
>>    healeys at autox.team.net
>> 
>> To subscribe or unsubscribe via the World Wide Web, visit
>>    http://autox.team.net/mailman/listinfo/healeys
>> or, via email, send a message with subject or body 'help' to
>>    healeys-request at autox.team.net
>> 
>> You can reach the person managing the list at
>>    healeys-owner at autox.team.net
>> 
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of Healeys digest..."
>> 
>> 
>> Today's Topics:
>> 
>>   1. Re: Healeys Digest, Vol 11, Issue 324 (Gary Anderson)
>>   2. Re: paint type (Frank Magnusson)
>>   3. Re: Lift for Healeys (Bob Spidell)
>>   4. Re: Lift for Healeys (Richard Collins)
>> 
>> 
>> ----------------------------------------------------------------------
>> 
>> Message: 1
>> Date: Tue, 23 Oct 2018 16:32:00 -0400
>> From: Gary Anderson <editorgary at aol.com>
>> To: healeys at autox.team.net
>> Subject: Re: [Healeys] Healeys Digest, Vol 11, Issue 324
>> Message-ID: <628F5308-3B81-487C-BE7B-D2944E15F82E at aol.com>
>> Content-Type: text/plain;    charset=utf-8
>> 
>> When we wrote that I think we were saying that the inset red was baked or fired in to create a glass effect? to distinguish it from paint. Someone should take it to a jewelry maker and ask what it is rathe than guessing.
>> G
>> 
>> Gary Anderson 
>> 
>> 
>>> On Oct 23, 2018, at 2:00 PM, healeys-request at autox.team.net wrote:
>>> 
>>> Send Healeys mailing list submissions to
>>>   healeys at autox.team.net
>>> 
>>> To subscribe or unsubscribe via the World Wide Web, visit
>>>   http://autox.team.net/mailman/listinfo/healeys
>>> or, via email, send a message with subject or body 'help' to
>>>   healeys-request at autox.team.net
>>> 
>>> You can reach the person managing the list at
>>>   healeys-owner at autox.team.net
>>> 
>>> When replying, please edit your Subject line so it is more specific
>>> than "Re: Contents of Healeys digest..."
>>> 
>>> 
>>> Today's Topics:
>>> 
>>>  1. Re: Paint type (Curtis Arndt)
>>>  2. Re: Paint type (Michael Salter)
>>>  3. Re: Paint type (Roger Moment)
>>>  4. Re: Paint type (nconklin at sbcglobal.net)
>>>  5. Re: Badge on bonnet ? Hyphenated or Not  [was ?Paint type and
>>>     color?] (Ian Hey)
>>>  6.  Paint type (simon.lachlan at alexarevel.plus.com)
>>>  7. Re: Paint type and color (Bob Spidell)
>>>  8. Re: Paint type (Andy Sneddon)
>>> 
>>> 
>>> ----------------------------------------------------------------------
>>> 
>>> Message: 1
>>> Date: Thu, 18 Oct 2018 22:42:23 -0700
>>> From: Curtis Arndt <cnaarndt at gmail.com>
>>> To: gary brierton <gbrierton at hotmail.com>
>>> Cc: Roger Moment <rmoment at comcast.net>, Healey List
>>>   <healeys at autox.team.net>, Michael Salter <michael.salter at gmail.com>
>>> Subject: Re: [Healeys] Paint type
>>> Message-ID:
>>>   <CAJKrNeSRsNDpMHL6OD7JMfxY2d2rQ7YROqh+2MJvOMxjauR+sA at mail.gmail.com>
>>> Content-Type: text/plain; charset="utf-8"
>>> 
>>> Gary,
>>> 
>>> With all due respect, sorry but you are mistaken on a number of points.
>>> 
>>> *Michael Salter... Please make this my first revision for the next Concours
>>> Guidelines update. *
>>> 
>>> First off, the badges were never Cloisonne, they are red enamel.  Yes, the
>>> Concours Guidelines state that they are Cloisonne, the Guidelines are
>>> WRONG.  I am officially submitting an update for the next Concours
>>> Guidelines revision.
>>> 
>>> Copied from the Concours Guidelines...
>>> 
>>> *"All cars up through the Mark I 3000s had flat Austin-Healey "wings"
>>> mounted on the front between the grille and bonnet opening, with red
>>> cloisonn? lettering inset in chrome."  *
>>> 
>>> Change to read* "**red enamel lettering"*
>>> 
>>> This is where the confusion first arises!
>>> 
>>> Secondly, all Austin Healey badges were red enamel from the very first BN1
>>> in 1953 through the BJ8 at chassis no. 39975. After that they were indeed
>>> painted red.  Also copied from the Concours Guidelines...
>>> 
>>> *"BJ8s produced starting around C. 39,975 (approximate date ? December
>>> 1966) had a similar badge that was not cloisonn? but was painted red
>>> instead of the cloisonn?. These later badges have a smooth background
>>> instead of the pebbled background of the enameled badges." *
>>> 
>>> Change to read* "**was not enamel but was painted red instead of the
>>> enamel."*
>>> 
>>> Karla Maxwell, a trained jeweler with 45+ years experience who owns Maxwell
>>> Enamels will tell you, as she told me 25 years ago that automotive badges
>>> are enamel and NOT Cloisonne.  Karla is the premier automotive emblem
>>> restorer in the US, is in high demand for Pebble Beach participants, is a
>>> neighbor and personal friend of 25+ years. Karla has restored a number of
>>> badges personally for me, and I have done some Bakelite restoration work
>>> for Karla for Pebble Beach cars that she was working on.  Oh, and Karla's
>>> business is Maxwell Enamels NOT Maxwell Cloisonne.  In the UK the best
>>> known badge restorer is PD Enamels, NOT PD Cloisonne.
>>> 
>>> I hope that this clears things up once and for all.
>>> 
>>> This is from Karla's FAQ section of her website...
>>> http://www.maxwellenamels.com/FAQs.html
>>> 
>>> *FAQ... How was my emblem created? *
>>> 
>>> These enameled emblems are often, *incorrectly, referred to as cloisonn?*.
>>> Cloisonn? is an enamel process in which separate bands of metal are bent
>>> then applied to a base. These labor intensive bands encase the enamel and
>>> create the design. I have yet to see an automobile emblem done with
>>> cloisonn?. The process that is used is called *champlev?* (pronounced
>>> shomp?-leh-vay).
>>> 
>>> The champlev? technique involves applying enamel into depressions in the
>>> base metal. These depressions may be etched, engraved or, in the case of
>>> automobile emblems, die stamped. The stamping process can also include the
>>> beautiful design work that shows under transparent enamels.
>>> 
>>> Historically the word enamel meant glass but today it seems to refer to any
>>> shiny color. The correct terminology is *vitreous* [glass] enamel. It is a
>>> true glass that melts and fuses around 1400 degrees F.  Enamel can be
>>> obtained as opaque, translucent or transparent. The colors are created by
>>> the addition of metallic oxides to the glass.
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> On Thu, Oct 18, 2018 at 8:31 PM Gary R. Brierton <gbrierton at hotmail.com>
>>> wrote:
>>> 
>>>> OK...let's try and clear this up.  As I understand it, the "flat wings
>>>> with the Austin-Healey script" commonly seen on BN1, BN2 and (I don't know
>>>> when it stopped), had red paint of unknown shade in the etched out
>>>> lettering.  Along came the larger badges with MKII or whatever, in
>>>> cloisonne. THEN, to really screw us up, those badges returned to red
>>>> paint of unknown shade, seemingly during BJ8 production.  As was true with
>>>> almost everything involving our cars, the exact change VIN number for all
>>>> of this is largely indeterminate, at least as far as trim pieces are
>>>> concerned...oh, and some major body parts, like wings with one  or two
>>>> signaling lights, swag lines, whatever.  Reliable reports (from D.M.H.!)
>>>> state that the guiding principle in assembling our cars was "use up what
>>>> was on hand".
>>>> I claim no expertise beyond owning Austin-Healeys and associating with
>>>> their owners for over 50 years (so, mainly the 6 cylinder cars).
>>>> Take it away, Curt, Randy, Steve, et. al.?
>>>> 
>>>> _______________________________________________
>>>> Support Team.Net http://www.team.net/donate.html
>>>> Suggested annual donation  $12.75
>>>> 
>>>> Archive: http://www.team.net/pipermail/healeys
>>>> http://autox.team.net/archive
>>>> 
>>>> Healeys at autox.team.net
>>>> http://autox.team.net/mailman/listinfo/healeys
>>>> 
>>>> Unsubscribe/Manage:
>>>> http://autox.team.net/mailman/options/healeys/cnaarndt@gmail.com
>>>> 
>>>> 
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL: <http://autox.team.net/pipermail/healeys/attachments/20181018/adfc7872/attachment-0001.html>
>>> 
>>> ------------------------------
>>> 
>>> Message: 2
>>> Date: Fri, 19 Oct 2018 07:35:37 -0400
>>> From: Michael Salter <michael.salter at gmail.com>
>>> To: "Curt/Nancy Arndt" <cnaarndt at gmail.com>
>>> Cc: healeys at autox.team.net, Roger Moment <rmoment at comcast.net>
>>> Subject: Re: [Healeys] Paint type
>>> Message-ID:
>>>   <CAB3i7LLfSqVEa0A-9kTz5MfTZKpfydwTXqHheHSZYnp2Bb7dJg at mail.gmail.com>
>>> Content-Type: text/plain; charset="utf-8"
>>> 
>>> Okay now I  get it.
>>> What I have been refering to as "cliosonne" is actually "vitreous enamel"
>>> (also know as champlev?) and that is actually what was used in all front
>>> badges until the later Mk III badges that appeared with red paint.
>>> What is important is that the vitreous enamel IS NOT PAINT.
>>> Part of the terminology problem is that some paints are commonly referred
>>> to as "emamel" but enamel paint is not what was used in the badges prior to
>>> MkIII cars prior to around HBJ8L 39975.
>>> If this is agreed I will make the appropriate changes to the guidelines.
>>> 
>>> M
>>> 
>>> 
>>>> On Fri, Oct 19, 2018, 1:42 AM Curtis Arndt, <cnaarndt at gmail.com> wrote:
>>>> 
>>>> Gary,
>>>> 
>>>> With all due respect, sorry but you are mistaken on a number of points.
>>>> 
>>>> *Michael Salter... Please make this my first revision for the next
>>>> Concours Guidelines update. *
>>>> 
>>>> First off, the badges were never Cloisonne, they are red enamel.  Yes, the
>>>> Concours Guidelines state that they are Cloisonne, the Guidelines are
>>>> WRONG.  I am officially submitting an update for the next Concours
>>>> Guidelines revision.
>>>> 
>>>> Copied from the Concours Guidelines...
>>>> 
>>>> *"All cars up through the Mark I 3000s had flat Austin-Healey "wings"
>>>> mounted on the front between the grille and bonnet opening, with red
>>>> cloisonn? lettering inset in chrome."  *
>>>> 
>>>> Change to read* "**red enamel lettering"*
>>>> 
>>>> This is where the confusion first arises!
>>>> 
>>>> Secondly, all Austin Healey badges were red enamel from the very first BN1
>>>> in 1953 through the BJ8 at chassis no. 39975. After that they were indeed
>>>> painted red.  Also copied from the Concours Guidelines...
>>>> 
>>>> *"BJ8s produced starting around C. 39,975 (approximate date ? December
>>>> 1966) had a similar badge that was not cloisonn? but was painted red
>>>> instead of the cloisonn?. These later badges have a smooth background
>>>> instead of the pebbled background of the enameled badges." *
>>>> 
>>>> Change to read* "**was not enamel but was painted red instead of the
>>>> enamel."*
>>>> 
>>>> Karla Maxwell, a trained jeweler with 45+ years experience who owns
>>>> Maxwell Enamels will tell you, as she told me 25 years ago that automotive
>>>> badges are enamel and NOT Cloisonne.  Karla is the premier automotive
>>>> emblem restorer in the US, is in high demand for Pebble Beach participants,
>>>> is a neighbor and personal friend of 25+ years. Karla has restored a number
>>>> of badges personally for me, and I have done some Bakelite restoration work
>>>> for Karla for Pebble Beach cars that she was working on.  Oh, and Karla's
>>>> business is Maxwell Enamels NOT Maxwell Cloisonne.  In the UK the best
>>>> known badge restorer is PD Enamels, NOT PD Cloisonne.
>>>> 
>>>> I hope that this clears things up once and for all.
>>>> 
>>>> This is from Karla's FAQ section of her website...
>>>> http://www.maxwellenamels.com/FAQs.html
>>>> 
>>>> *FAQ... How was my emblem created? *
>>>> 
>>>> These enameled emblems are often, *incorrectly, referred to as cloisonn?*.
>>>> Cloisonn? is an enamel process in which separate bands of metal are bent
>>>> then applied to a base. These labor intensive bands encase the enamel and
>>>> create the design. I have yet to see an automobile emblem done with
>>>> cloisonn?. The process that is used is called *champlev?* (pronounced
>>>> shomp?-leh-vay).
>>>> 
>>>> The champlev? technique involves applying enamel into depressions in the
>>>> base metal. These depressions may be etched, engraved or, in the case of
>>>> automobile emblems, die stamped. The stamping process can also include the
>>>> beautiful design work that shows under transparent enamels.
>>>> 
>>>> Historically the word enamel meant glass but today it seems to refer to
>>>> any shiny color. The correct terminology is *vitreous* [glass] enamel. It
>>>> is a true glass that melts and fuses around 1400 degrees F.  Enamel can be
>>>> obtained as opaque, translucent or transparent. The colors are created by
>>>> the addition of metallic oxides to the glass.
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> On Thu, Oct 18, 2018 at 8:31 PM Gary R. Brierton <gbrierton at hotmail.com>
>>>> wrote:
>>>> 
>>>>> OK...let's try and clear this up.  As I understand it, the "flat wings
>>>>> with the Austin-Healey script" commonly seen on BN1, BN2 and (I don't know
>>>>> when it stopped), had red paint of unknown shade in the etched out
>>>>> lettering.  Along came the larger badges with MKII or whatever, in
>>>>> cloisonne. THEN, to really screw us up, those badges returned to red
>>>>> paint of unknown shade, seemingly during BJ8 production.  As was true with
>>>>> almost everything involving our cars, the exact change VIN number for all
>>>>> of this is largely indeterminate, at least as far as trim pieces are
>>>>> concerned...oh, and some major body parts, like wings with one  or two
>>>>> signaling lights, swag lines, whatever.  Reliable reports (from D.M.H.!)
>>>>> state that the guiding principle in assembling our cars was "use up what
>>>>> was on hand".
>>>>> I claim no expertise beyond owning Austin-Healeys and associating with
>>>>> their owners for over 50 years (so, mainly the 6 cylinder cars).
>>>>> Take it away, Curt, Randy, Steve, et. al.?
>>>>> 
>>>>> _______________________________________________
>>>>> Support Team.Net http://www.team.net/donate.html
>>>>> Suggested annual donation  $12.75
>>>>> 
>>>>> Archive: http://www.team.net/pipermail/healeys
>>>>> http://autox.team.net/archive
>>>>> 
>>>>> Healeys at autox.team.net
>>>>> http://autox.team.net/mailman/listinfo/healeys
>>>>> 
>>>>> Unsubscribe/Manage:
>>>>> http://autox.team.net/mailman/options/healeys/cnaarndt@gmail.com
>>>>> 
>>>>> 
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL: <http://autox.team.net/pipermail/healeys/attachments/20181019/e98c54ac/attachment-0001.html>
>>> 
>>> ------------------------------
>>> 
>>> Message: 3
>>> Date: Fri, 19 Oct 2018 06:06:25 -0600
>>> From: "Roger Moment" <Rmoment at comcast.net>
>>> To: "Curtis Arndt" <cnaarndt at gmail.com>, "gary brierton"
>>>   <gbrierton at hotmail.com>
>>> Cc: Sean and Tricia Johnson <healey at communitynet.org>, Michael Salter
>>>   <michael.salter at gmail.com>, Healey List <healeys at autox.team.net>,
>>>   "Tom, Kaye Kovacs" <fntune at charter.net>, carol hodgman
>>>   <carolhodgman at gmail.com>
>>> Subject: Re: [Healeys] Paint type
>>> Message-ID: <8D06CCAAE5FA42AD8B68682CE6AB4ECD at 7RM>
>>> Content-Type: text/plain; charset="utf-8"
>>> 
>>> To all,
>>> 
>>> I?m not clear about who wrote what, but ALL Healey wing badges WERE CLOISONN? (up to late BJ8s, starting in Dec. 1966, as stated in the current Guidelines)!!!!!!!!  You can tell  this because the red lettering color is transparent and you can see through to the backing.
>>> 
>>> This is why you cannot just repair the red on a badge.  The Cloisonn? process requires high heat and would destroy the Cr plating ? they do the lettering first and plate with Cr afterwards.
>>> 
>>> I have had manly original badges restored by P-D Enamels in England.  Yes, their name has ?Enamels? in it, but the process they use to replicate original badges like the Healey winged ones is Cloisonn?.  They have seen a very large number of these and have restored them exactly as-new.  They agree that the red ?fill? was Cloisonn?!!!  They restore them with this material.
>>> 
>>> Look at old defective badges.  Where the color has started to separate from the backing it looks darker.  This is because you are looking through a glass and can identify separation from the backing.   Where it is missing in places it looks exactly like chipped out glass, not paint.  It is much thicker than paint.
>>> 
>>> On the late BJ8s they went to paint.  This looks totally different!!!
>>> 
>>> The Guidelines as currently written are correct!!  DO NOT CHANGE!!!!!!!!
>>> 
>>> I?ll ?go to the mat? on this!!!!
>>> 
>>> 
>>> Roger
>>> 
>>> From: Curtis Arndt 
>>> Sent: Thursday, October 18, 2018 11:42 PM
>>> To: gary brierton 
>>> Cc: Healey List ; Michael Salter ; Roland Wilhelmy ; Roger Moment 
>>> Subject: Re: [Healeys] Paint type
>>> 
>>> Gary, 
>>> 
>>> With all due respect, sorry but you are mistaken on a number of points. 
>>> 
>>> Michael Salter... Please make this my first revision for the next Concours Guidelines update. 
>>> 
>>> First off, the badges were never Cloisonne, they are red enamel.  Yes, the Concours Guidelines state that they are Cloisonne, the Guidelines are WRONG.  I am officially submitting an update for the next Concours Guidelines revision.
>>> 
>>> Copied from the Concours Guidelines...
>>> 
>>> 
>>> "All cars up through the Mark I 3000s had flat Austin-Healey "wings" mounted on the front between the grille and bonnet opening, with red cloisonn? lettering inset in chrome."  
>>> 
>>> Change to read "red enamel lettering"
>>> 
>>> 
>>> This is where the confusion first arises!
>>> 
>>> Secondly, all Austin Healey badges were red enamel from the very first BN1 in 1953 through the BJ8 at chassis no. 39975. After that they were indeed painted red.  Also copied from the Concours Guidelines...
>>> 
>>> "BJ8s produced starting around C. 39,975 (approximate date ? December 1966) had a similar badge that was not cloisonn? but was painted red instead of the cloisonn?. These later badges have a smooth background instead of the pebbled background of the enameled badges." 
>>> 
>>> Change to read "was not enamel but was painted red instead of the enamel."
>>> 
>>> Karla Maxwell, a trained jeweler with 45+ years experience who owns Maxwell Enamels will tell you, as she told me 25 years ago that automotive badges are enamel and NOT Cloisonne.  Karla is the premier automotive emblem restorer in the US, is in high demand for Pebble Beach participants, is a neighbor and personal friend of 25+ years. Karla has restored a number of badges personally for me, and I have done some Bakelite restoration work for Karla for Pebble Beach cars that she was working on.  Oh, and Karla's business is Maxwell Enamels NOT Maxwell Cloisonne.  In the UK the best known badge restorer is PD Enamels, NOT PD Cloisonne.
>>> 
>>> I hope that this clears things up once and for all.
>>> 
>>> This is from Karla's FAQ section of her website... http://www.maxwellenamels.com/FAQs.html
>>> FAQ... How was my emblem created? 
>>> 
>>> These enameled emblems are often, incorrectly, referred to as cloisonn?. Cloisonn? is an enamel process in which separate bands of metal are bent then applied to a base. These labor intensive bands encase the enamel and create the design. I have yet to see an automobile emblem done with cloisonn?. The process that is used is called champlev? (pronounced shomp?-leh-vay).
>>> 
>>> The champlev? technique involves applying enamel into depressions in the base metal. These depressions may be etched, engraved or, in the case of automobile emblems, die stamped. The stamping process can also include the beautiful design work that shows under transparent enamels. 
>>> 
>>> Historically the word enamel meant glass but today it seems to refer to any shiny color. The correct terminology is vitreous [glass] enamel. It is a true glass that melts and fuses around 1400 degrees F.  Enamel can be obtained as opaque, translucent or transparent. The colors are created by the addition of metallic oxides to the glass.
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> On Thu, Oct 18, 2018 at 8:31 PM Gary R. Brierton <gbrierton at hotmail.com> wrote:
>>> 
>>> OK...let's try and clear this up.  As I understand it, the "flat wings with the Austin-Healey script" commonly seen on BN1, BN2 and (I don't know when it stopped), had red paint of unknown shade in the etched out lettering.  Along came the larger badges with MKII or whatever, in cloisonne. THEN, to really screw us up, those badges returned to red paint of unknown shade, seemingly during BJ8 production.  As was true with almost everything involving our cars, the exact change VIN number for all of this is largely indeterminate, at least as far as trim pieces are concerned...oh, and some major body parts, like wings with one  or two signaling lights, swag lines, whatever.  Reliable reports (from D.M.H.!) state that the guiding principle in assembling our cars was "use up what was on hand".
>>> I claim no expertise beyond owning Austin-Healeys and associating with their owners for over 50 years (so, mainly the 6 cylinder cars).
>>> Take it away, Curt, Randy, Steve, et. al.?
>>> 
>>> _______________________________________________
>>> Support Team.Net http://www.team.net/donate.html
>>> Suggested annual donation  $12.75
>>> 
>>> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>>> 
>>> Healeys at autox.team.net
>>> http://autox.team.net/mailman/listinfo/healeys
>>> 
>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/cnaarndt@gmail.com
>>> 
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL: <http://autox.team.net/pipermail/healeys/attachments/20181019/c71ccf5e/attachment-0001.html>
>>> 
>>> ------------------------------
>>> 
>>> Message: 4
>>> Date: Fri, 19 Oct 2018 14:59:17 +0000 (UTC)
>>> From: "nconklin at sbcglobal.net" <nconklin at sbcglobal.net>
>>> To: Curtis Arndt <cnaarndt at gmail.com>, gary brierton
>>>   <gbrierton at hotmail.com>
>>> Cc: Roger Moment <rmoment at comcast.net>, Healey List
>>>   <healeys at autox.team.net>, Michael Salter <michael.salter at gmail.com>
>>> Subject: Re: [Healeys] Paint type
>>> Message-ID: <1851283472.13517403.1539961157512 at mail.yahoo.com>
>>> Content-Type: text/plain; charset="utf-8"
>>> 
>>> Nice write up and documentation , Thanks Curt
>>> 
>>> 
>>> Sent from Yahoo Mail for iPhone
>>> 
>>> 
>>> On Thursday, October 18, 2018, 10:42 PM, Curtis Arndt <cnaarndt at gmail.com> wrote:
>>> 
>>> Gary,
>>> With all due respect, sorry but you are mistaken on a number of points.?
>>> Michael Salter... Please make this my first revision for the next Concours Guidelines update.?
>>> First off, the badges were never Cloisonne, they are red enamel.? Yes, the Concours Guidelines state that they are Cloisonne, the Guidelines are WRONG.? I am officially submitting an update for the next Concours Guidelines revision.
>>> Copied from the Concours Guidelines...
>>> "All cars up through the Mark I 3000s had flat Austin-Healey "wings" mounted on the front between the grille and bonnet opening, with red cloisonn? lettering inset in chrome."??
>>> Change to read?"red enamel lettering"
>>> 
>>> This is where the confusion first arises!
>>> Secondly, all Austin Healey badges were red enamel from the very first BN1 in 1953 through the BJ8 at chassis no. 39975. After that they were indeed painted red.? Also copied from the Concours Guidelines...
>>> "BJ8s produced starting around C. 39,975 (approximate date ? December 1966) had a similar badge that was not cloisonn? but was painted red instead of the cloisonn?.?These later badges have a smooth background instead of the pebbled background of?the enameled badges."?
>>> Change to read?"was not enamel but was painted red instead of the enamel."
>>> Karla Maxwell, a trained jeweler with 45+ years experience who owns Maxwell Enamels will tell you, as she told me 25 years ago that automotive badges are enamel and NOT Cloisonne.? Karla is the premier automotive emblem restorer in the US, is in high demand for Pebble Beach participants, is a neighbor and personal friend of 25+ years. Karla has restored a number of badges personally for me, and I have done some Bakelite restoration work for Karla for Pebble Beach cars that she was working on.? Oh, and Karla's business is Maxwell Enamels NOT Maxwell Cloisonne.? In the UK the best known badge restorer is PD Enamels, NOT PD Cloisonne.
>>> I hope that this clears things up once and for all.
>>> This is from Karla's FAQ section of her website...?http://www.maxwellenamels.com/FAQs.html
>>> FAQ... How was my emblem created??
>>> 
>>> These enameled emblems are often, incorrectly, referred to as?cloisonn?. Cloisonn? is an enamel process in which separate bands of metal are bent then applied to a base. These labor intensive bands encase the enamel and create the design. I have yet to see an automobile emblem done with cloisonn?. The process that is used is called?champlev??(pronounced shomp?-leh-vay).
>>> 
>>> The champlev? technique involves?applying enamel into depressions in the base metal. These depressions may be etched, engraved or, in the case of automobile emblems, die stamped. The stamping process can also include the beautiful design work that shows under transparent enamels.?
>>> 
>>> Historically the word enamel meant glass but today it seems to refer to any shiny color. The correct terminology is?vitreous?[glass] enamel. It is a true glass that melts and fuses around 1400 degrees F.? Enamel can be obtained as opaque, translucent or transparent. The colors are created by the addition of metallic oxides to the glass.
>>> 
>>> 
>>> 
>>> 
>>> ?
>>> 
>>> 
>>> 
>>> 
>>> On Thu, Oct 18, 2018 at 8:31 PM Gary R. Brierton <gbrierton at hotmail.com> wrote:
>>> 
>>> OK...let's try and clear this up.? As I understand it, the "flat wings with the Austin-Healey script" commonly seen on BN1, BN2 and (I don't know when it stopped), had red paint of unknown shade in the etched out lettering.? Along came the larger badges with MKII or whatever, incloisonne. THEN, to really screw us up, those badges returned to red paint of unknown shade, seemingly during BJ8 production.? As was true with almost everything involving our cars, the exact change VIN number for all of this is largely indeterminate, at least as far as trim pieces are concerned...oh, and some major body parts, like wings with one? or two signaling lights, swag lines, whatever.? Reliable reports (from D.M.H.!) state that the guiding principle in assembling our cars was "use up what was on hand".I claim no expertise beyond owning Austin-Healeys and associating with their owners for over 50 years (so, mainly the 6 cylinder cars).Take it away, Curt, Randy, Steve, et. al.?
>>> _______________________________________________
>>> Support Team.Net http://www.team.net/donate.html
>>> Suggested annual donation? $12.75
>>> 
>>> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>>> 
>>> Healeys at autox.team.net
>>> http://autox.team.net/mailman/listinfo/healeys
>>> 
>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/cnaarndt@gmail.com
>>> 
>>> 
>>> 
>>> 
>>> 
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL: <http://autox.team.net/pipermail/healeys/attachments/20181019/aad5db0c/attachment-0001.html>
>>> 
>>> ------------------------------
>>> 
>>> Message: 5
>>> Date: Sun, 21 Oct 2018 14:53:33 +0100
>>> From: "Ian Hey" <rianhey at btinternet.com>
>>> To: "'J. Scott Morris'" <jstmorris at yahoo.com>, "'Patrick Quinn'"
>>>   <p_cquinn at tpg.com.au>, "'Michael Oritt'" <michael.oritt at gmail.com>,
>>>   "'Healey List'" <healeys at autox.team.net>
>>> Subject: Re: [Healeys] Badge on bonnet ? Hyphenated or Not  [was
>>>   ?Paint type and color?]
>>> Message-ID: <002701d46945$754282a0$5fc787e0$@btinternet.com>
>>> Content-Type: text/plain; charset="utf-8"
>>> 
>>> I am not sure how to reply to the whole list, but my BJ7, Chassis No 25212, Body number 70069, only just over 100 from the end of BJ7 production has a hyphen in the badge.  I bought the 1963 car in 1977 and believe that the badge was probably original.
>>> 
>>> 
>>> 
>>> Interestingly there are some BJ8 features on the car.  Eg: the seal down the windscreen and on the rear of the front wing is one piece, as BJ8.
>>> 
>>> 
>>> 
>>> Ian Hey
>>> 
>>> 
>>> 
>>> From: Healeys <healeys-bounces at autox.team.net> On Behalf Of J. Scott Morris
>>> Sent: 20 October 2018 17:49
>>> To: Patrick Quinn <p_cquinn at tpg.com.au>; Michael Oritt <michael.oritt at gmail.com>; Healey List <healeys at autox.team.net>
>>> Subject: [Healeys] Badge on bonnet ? Hyphenated or Not [was ?Paint type and color?]
>>> 
>>> 
>>> 
>>> Good Day;  The issue of Austin Healey being hyphenated or not was discussed some time ago.  
>>> 
>>> 
>>> 
>>> Attached is my file of those discussions.  Each page should be read from the bottom to the top since the oldest email is at the bottom and most recent at the top.
>>> 
>>> 
>>> 
>>> Hope this provides some help on the topic.
>>> 
>>> --Scott Morris; Simcoe, Ontario, Canada    - Keep Smiling, Murphy Lives
>>> 
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL: <http://autox.team.net/pipermail/healeys/attachments/20181021/7db92ea4/attachment-0001.html>
>>> 
>>> ------------------------------
>>> 
>>> Message: 6
>>> Date: Tue, 23 Oct 2018 14:02:54 +0100
>>> From: <simon.lachlan at alexarevel.plus.com>
>>> To: "Healeys" <healeys at autox.team.net>
>>> Subject: [Healeys]  Paint type
>>> Message-ID: <000201d46ad0$b73913e0$25ab3ba0$@alexarevel.plus.com>
>>> Content-Type: text/plain; charset="utf-8"
>>> 
>>> As I said in a previous email, PamelaDavid did refer to the process as ?cloisonn??. (No hyphen!).  
>>> 
>>> Simon
>>> 
>>> 
>>> 
>>> 
>>> 
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL: <http://autox.team.net/pipermail/healeys/attachments/20181023/17eebefe/attachment-0001.html>
>>> 
>>> ------------------------------
>>> 
>>> Message: 7
>>> Date: Tue, 23 Oct 2018 08:01:28 -0700
>>> From: Bob Spidell <bspidell at comcast.net>
>>> To: healeys at autox.team.net
>>> Subject: Re: [Healeys] Paint type and color
>>> Message-ID: <42f07c83-3073-11b5-5dd9-658b613193ce at comcast.net>
>>> Content-Type: text/plain; charset="utf-8"; Format="flowed"
>>> 
>>> "... *just buy a quality one from Moss or other vendors"*
>>> 
>>> FWIW, I've bought several from different vendors--including Moss 
>>> IIRC--and, as someone pointed out, the coloring (enamel, paint, 
>>> whatever) doesn't last because it was applied to chrome.
>>> **
>>> 
>>>> On 10/22/2018 7:11 AM, Curtis Arndt wrote:
>>>> Steve and Fellow Listers,
>>>> 
>>>> There are two great vendors in the US.
>>>> 
>>>> Maxwell Enamels, Vista, CA...
>>>> 
>>>> http://www.maxwellenamels.com/Home_Page.html
>>>> 
>>>> I am a friend of the owner Karla Maxwell (25 years) and she has done 
>>>> work for me an I have done work for her (Bakelite restoration).
>>>> 
>>>> *She is expensive, and for most badges just buy a quality one from 
>>>> Moss or other vendors.*
>>>> 
>>>> Moss Motors has a very nice one for $134.00, $239.99 for MKII badges 
>>>> and $249.99 for MKIII badges... Less on sale.
>>>> 
>>>> Expect to pay $250-$350 plus to have your original restored.
>>>> 
>>>> https://mossmotors.com/badge-austin-healey-wings?assoc=6725
>>>> 
>>>> https://mossmotors.com/badge-austin-healey-mk-ii?assoc=7568
>>>> 
>>>> https://mossmotors.com/badge-austin-healey-mk-iii?assoc=7569
>>>> 
>>>> The other vendor is Emblemagic in Grand River, OH...
>>>> 
>>>> http://emblemagic.com/
>>>> 
>>>> Ray Geschke is the owner, and also very knowledgeable.
>>>> 
>>>> Cheers,
>>>> 
>>>> Curt
>>>> 
>>>> On Mon, Oct 22, 2018 at 3:49 AM BJ8Healeys <sbyers at ec.rr.com 
>>>> <mailto:sbyers at ec.rr.com>> wrote:
>>>> 
>>>>   There still seems to be some confusion between the _type of
>>>>   construction_ of the badge and the _material_ that is in the
>>>>   colored part.
>>>> 
>>>>   Cloisonn? and champlev? are jewelers' terms that refer to how the
>>>>   badge is constructed, while the red material is either "vitreous
>>>>   enamel" or paint.
>>>> 
>>>>   From the Merriam-Webster dictionary:
>>>> 
>>>>   *Definition of /cloisonn??(adjective)/*
>>>> 
>>>>   *: *of, relating to, or being a style of enamel decoration in
>>>>   which the enamel is applied and fired in _raised_ cells (as of
>>>>   soldered wires) on a usually metal background ? compare champlev?
>>>>   <https://www.merriam-webster.com/dictionary/champlev%C3%A9>
>>>> 
>>>>   *Definition of /champlev? (adjective) /*
>>>> 
>>>>   *: *of, relating to, or being a style of enamel decoration in
>>>>   which the enamel is applied and fired in cells _depressed_ (as by
>>>>   incising) into a metal background ? compare cloisonn?
>>>>   <https://www.merriam-webster.com/dictionary/cloisonn%C3%A9>
>>>> 
>>>>   *Definition of /vitreous enamel (noun) /*
>>>> 
>>>>   *: *a fired-on opaque glassy coating on steel or other metals
>>>> 
>>>>   ? called also porcelain enamel
>>>> 
>>>>   Based on these definitions, the BJ7/BJ8 badge _construction_ is
>>>>   champlev?, while the red _material_ is vitreous enamel or paint.?
>>>>   Some have claimed that their badge never had either material but
>>>>   were plain chrome.
>>>> 
>>>>   Steve Byers
>>>> 
>>>>   HBJ8L/36666
>>>> 
>>>>   BJ8 Registry
>>>> 
>>>>   AHCA Delegate at Large
>>>> 
>>>>   Havelock, NC
>>>> 
>>>> 
>>> 
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL: <http://autox.team.net/pipermail/healeys/attachments/20181023/813bf508/attachment-0001.html>
>>> 
>>> ------------------------------
>>> 
>>> Message: 8
>>> Date: Tue, 23 Oct 2018 17:56:52 +0100
>>> From: Andy Sneddon <sneddon at xsmail.com>
>>> To: <simon.lachlan at alexarevel.plus.com>,    Healeys
>>>   <healeys at autox.team.net>
>>> Subject: Re: [Healeys] Paint type
>>> Message-ID: <4F755E0A-929D-454D-B86F-897F9F3A8A7E at xsmail.com>
>>> Content-Type: text/plain; charset="utf-8"
>>> 
>>> Just had a look at my invoice paperwork from Derron (Pamela David Enamels / Badgecraft.co.uk) and he has described the process carried out on my badge as ? stripped, re-enamelled, chrome finish ?.
>>> 
>>> 
>>> 
>>> ? and I can only say that they did an excellent job.
>>> 
>>> 
>>> 
>>> Andy
>>> 
>>> 
>>> 
>>> From: Healeys <healeys-bounces at autox.team.net> on behalf of <simon.lachlan at alexarevel.plus.com>
>>> Date: Tuesday, 23 October 2018 at 14:52
>>> To: Healeys <healeys at autox.team.net>
>>> Subject: [Healeys] Paint type
>>> 
>>> 
>>> 
>>> As I said in a previous email, PamelaDavid did refer to the process as ?cloisonn??. (No hyphen!).  
>>> 
>>> Simon
>>> 
>>> 
>>> 
>>> 
>>> 
>>> _______________________________________________ Support Team.Net http://www.team.net/donate.html Suggested annual donation $12.75 Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive Healeys at autox.team.net http://autox.team.net/mailman/listinfo/healeys Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/sneddon@xsmail.com 
>>> 
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL: <http://autox.team.net/pipermail/healeys/attachments/20181023/cf8623e9/attachment-0001.html>
>>> 
>>> ------------------------------
>>> 
>>> Subject: Digest Footer
>>> 
>>> _______________________________________________
>>> Healeys mailing list
>>> Healeys at autox.team.net
>>> http://autox.team.net/mailman/listinfo/healeys
>>> 
>>> 
>>> ------------------------------
>>> 
>>> End of Healeys Digest, Vol 11, Issue 324
>>> ****************************************
>> 
>> 
>> 
>> ------------------------------
>> 
>> Message: 2
>> Date: Tue, 23 Oct 2018 16:19:29 -0500
>> From: "Frank Magnusson" <fmags at cox.net>
>> To: <healeys at autox.team.net>
>> Subject: Re: [Healeys] paint type
>> Message-ID: <00a101d46b16$15f30e50$41d92af0$@cox.net>
>> Content-Type: text/plain; charset="iso-8859-1"
>> 
>> 
>> 
>> I sure hope that a concours guide isn?t written or modified like this.  This
>> is just a bunch of here say over email.
>> 
>> 
>> 
>> What you need to do, if it even matters, is to take an original badge to a
>> badge restorer that does both enamel and cloisonn? and have them evaluate it
>> and determine how it was made.  That should be documented on that companies
>> letterhead and that documentation should be used to either update the
>> concours guide or leave it as is.  If that is not how concours guides are
>> done, than I?ve lost all respect for concours.  Without that, its just a
>> bunch of guys bickering claiming to be ?The Expert?.  It should not be based
>> on some generic 25 year old statement that ?auto badges are enamel?, either.
>> 
>> 
>> 
>> I am no expert, and do not claim to be.  However, I just took an original
>> cloisonn? badge that I have from a 1940s aircraft restoration that I?m doing
>> that has red in it, and compared it to my non-hyphenated Austin Healey Mk
>> III badge and they look very similar.  To this untrained eye, I cannot tell,
>> but it?s not obvious.
>> 
>> 
>> 
>> Take one to an expert or several experts.  Not many people are doing
>> cloisonn? repair anymore; I have checked to repair my aircraft badge, and I
>> am not sure if there are any in the U.S., but it?s been awhile since I
>> checked.  A badge restoration shop that does both cloisonn? and enamel
>> repair is the only qualified place to know for sure.
>> 
>> 
>> 
>> My unsolicited 2 cents.
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> ---
>> This email has been checked for viruses by Avast antivirus software.
>> https://www.avast.com/antivirus
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <http://autox.team.net/pipermail/healeys/attachments/20181023/e838622f/attachment-0001.html>
>> 
>> ------------------------------
>> 
>> Message: 3
>> Date: Tue, 23 Oct 2018 21:22:25 -0700
>> From: Bob Spidell <bspidell at comcast.net>
>> To: healeys at autox.team.net
>> Subject: Re: [Healeys] Lift for Healeys
>> Message-ID: <c7c79a42-e435-29cb-f09b-4b8de505833e at comcast.net>
>> Content-Type: text/plain; charset=utf-8; format=flowed
>> 
>> I've been a bit distracted by recent events, but I'm still researching 
>> lifts.? I called the '800' number for Greg Smith lifts, and talked a guy 
>> that (I think) was a distributor in Riverside, CA.? I mentioned I would 
>> prefer an American-made lift and he let slip--or was just being 
>> forthright, I can't say for sure--that all lifts save Mohawk brand were 
>> made in China (probably, they are made in China in one or a few 
>> factories but are distributed under various brands; the Greg Smith site 
>> cites a 'Texas company;'? check it out for some 'dirt' on lifts).? I'd 
>> not heard of Mohawk but, of course, I immediately stated googlin'. The 
>> Mohawk site has issues, but has some, er, 'interesting' information (see 
>> here:
>> 
>> http://mohawkliftpics.com/product-pictures/2-post-lifts/a-7/
>> 
>> ... and look, in particular, under 'Comparison Photo Galleries'
>> 
>> One option is for 4 wheel cradles that effectively turn the lift into a 
>> 4-post.?? I really like this idea.
>> 
>> The Mohawk site doesn't list any prices, so it's one of those 'if you 
>> have to ask' things.? But, I'm OK buying a cheap made-in-China tool from 
>> Harbor Freight that probably will leak air but I might use 6 times in my 
>> lifetime, but getting under a lift with plastic wheels and cables, and 
>> welds that break makes me nervous.
>> 
>> Just passing what I've learned along.? This is a significant investment 
>> for me, and I'm inclined to spend extra up front for peace of mind.
>> 
>> Bob
>> 
>> 
>>> On 10/14/2018 12:16 PM, Kent McLean wrote:
>>> Bob Spidell wrote:
>>>> Space isn't an issue; my dad built a large 'barn'--that's what it's
>>>> shaped like, and what we call it--but it's really a large shop
>>>> URL: <http://autox.team.net/pipermail/healeys/attachments/20181014/0d66a155/attachment-0001.jpe>
>>> Wow. Who did you have to kill for that?  I mean, Wow, nice shop.
>>> 
>>> A few years ago we bought a house with a 32x24 barn (with a few stalls for horses).  A year later my wife peeked in and said, ?It looks like we?ve lived here for 20 years.?  I really need to start tossing some of my "treasures" so my kids don?t have to.
>>> 
>>> -
>>> Kent McLean
>>> ?56 100 BN2
>>> 
>> 
>> 
>> 
>> ------------------------------
>> 
>> Message: 4
>> Date: Wed, 24 Oct 2018 14:18:20 +0000
>> From: Richard Collins <gonnagitcha90 at hotmail.com>
>> To: Bob Spidell <bspidell at comcast.net>
>> Cc: "healeys at autox.team.net" <healeys at autox.team.net>
>> Subject: Re: [Healeys] Lift for Healeys
>> Message-ID:
>>    <SN6PR19MB22565C3FDECC279F731B3653BFF60 at SN6PR19MB2256.namprd19.prod.outlook.com>
>>    
>> Content-Type: text/plain; charset="utf-8"
>> 
>> My Rotary Revolution 4post was Made in America when I bought and assembled myself 10-12 years ago.
>> I did substantial research and found the critical points, Chinese or not, was the weight of the steel used and the locking mechanism being failsafe as possible. A Chinese one I saw had ramps which Bent when driven on and off with a vehicle whose weight was well within its specs.
>> I went to several ?good guys? hot rod shows and looked at various models on display. The quality differences are noticeable. The higher quality ones have certifications and insurance coverage as well.
>> Mine has paid for itself many times over.
>> Regards,
>> Richard C
>> BN7 440
>> And several other brands
>> 
>> 
>>> On Oct 24, 2018, at 1:23 AM, Bob Spidell <bspidell at comcast.net> wrote:
>>> 
>>> I've been a bit distracted by recent events, but I'm still researching lifts.  I called the '800' number for Greg Smith lifts, and talked a guy that (I think) was a distributor in Riverside, CA.  I mentioned I would prefer an American-made lift and he let slip--or was just being forthright, I can't say for sure--that all lifts save Mohawk brand were made in China (probably, they are made in China in one or a few factories but are distributed under various brands; the Greg Smith site cites a 'Texas company;'  check it out for some 'dirt' on lifts).  I'd not heard of Mohawk but, of course, I immediately stated googlin'. The Mohawk site has issues, but has some, er, 'interesting' information (see here:
>>> 
>>> http://mohawkliftpics.com/product-pictures/2-post-lifts/a-7/
>>> 
>>> ... and look, in particular, under 'Comparison Photo Galleries'
>>> 
>>> One option is for 4 wheel cradles that effectively turn the lift into a 4-post.   I really like this idea.
>>> 
>>> The Mohawk site doesn't list any prices, so it's one of those 'if you have to ask' things.  But, I'm OK buying a cheap made-in-China tool from Harbor Freight that probably will leak air but I might use 6 times in my lifetime, but getting under a lift with plastic wheels and cables, and welds that break makes me nervous.
>>> 
>>> Just passing what I've learned along.  This is a significant investment for me, and I'm inclined to spend extra up front for peace of mind.
>>> 
>>> Bob
>>> 
>>> 
>>>>> On 10/14/2018 12:16 PM, Kent McLean wrote:
>>>>> Bob Spidell wrote:
>>>>> Space isn't an issue; my dad built a large 'barn'--that's what it's
>>>>> shaped like, and what we call it--but it's really a large shop
>>>>> URL: <http://autox.team.net/pipermail/healeys/attachments/20181014/0d66a155/attachment-0001.jpe>
>>>> Wow. Who did you have to kill for that?  I mean, Wow, nice shop.
>>>> 
>>>> A few years ago we bought a house with a 32x24 barn (with a few stalls for horses).  A year later my wife peeked in and said, ?It looks like we?ve lived here for 20 years.?  I really need to start tossing some of my "treasures" so my kids don?t have to.
>>>> 
>>>> -
>>>> Kent McLean
>>>> ?56 100 BN2
>>>> 
>>> 
>>> _______________________________________________
>>> Support Team.Net http://www.team.net/donate.html
>>> Suggested annual donation  $12.75
>>> 
>>> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>>> 
>>> Healeys at autox.team.net
>>> http://autox.team.net/mailman/listinfo/healeys
>>> 
>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/gonnagitcha90@hotmail.com
>>> 
>> 
>> ------------------------------
>> 
>> Subject: Digest Footer
>> 
>> _______________________________________________
>> Healeys mailing list
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>> 
>> 
>> ------------------------------
>> 
>> End of Healeys Digest, Vol 11, Issue 325
>> ****************************************
>
>_______________________________________________
>Support Team.Net http://www.team.net/donate.html
>Suggested annual donation  $12.75
>
>Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>
>Healeys at autox.team.net
>http://autox.team.net/mailman/listinfo/healeys
>
>Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/sentenac.rw@gmail.com
>


More information about the Healeys mailing list