[Healeys] Testing condenser
Bob Spidell
bspidell at comcast.net
Thu Oct 4 08:29:45 MDT 2018
This guy has a lot of good info:
https://mgaguru.com/mgtech/ignition/ig129.htm
On 10/3/2018 8:24 PM, Ron Fine wrote:
> Is there a simple way to test a distributor condenser out of the car?
> After many years of easy driving, my Healey suddenly quit on me,
> without warning. Fortunately, it was in front of my home after coming
> back from the local drive.
> I found a sticking float valve on the front carb. Cleaned that out and
> tried to restart without success. Next I looked into the distributor,
> and after cleaning the points and cap it still would not start. I
> decided to change out the condenser which I know from past experience
> can go bad. That seemed to make the difference. But, I have several
> new and a few used condensers in my inventory. I would like to try to
> test them to keep the good ones and reduce my clutter of unusable parts.
> Any suggestions other than installing it in a car to see if it works?
> Thanks,
> Ron Fine
> 61BN7
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20181004/7e31f2d9/attachment.html>
More information about the Healeys
mailing list