[Healeys] No start condition

[Chuck Ott]

I bought 11 feet of #2 AWG welding wire for my replacement BJ8 battery cable.  It is slightly larger diameter than the original, but still fits through the original clips and grommets.  It worked out very well.  I did have a small amount of excess, but I don't recall exactly how much.

Chuck Ott
BJ8, AN9


-----Original Message-----
From: Fred Wescoe <fredwescoe at gmail.com>
To: healeys <Healeys at autox.team.net>
Sent: Wed, May 2, 2018 10:49 pm
Subject: [Healeys] No start condition

My no start condition has returned as many on the list indicated other sources of the problem.

I have discovered high resistance and no voltage on the battery cable connector to starter solenoid.  So, I am replacing the original cable with a new one.  

Can anyone tell me what gauge and length the cable is from the battery to the starter solenoid? 

I will use the solder on type of connectors at both ends to try and eliminate corrosion inside the connectors.

Thanks for the help,

Fred
66 BJ8
_______________________________________________


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20180503/e1240e24/attachment.html>