[Healeys] No start condition

[Linwood Rose]

While you can certainly make your own, as I recall  British Car Specialists sells a proper length cable with connectors already soldered onto the cable.
Lin

Sent from my iPad

> On May 2, 2018, at 5:19 PM, Fred Wescoe <fredwescoe at gmail.com> wrote:
> 
> My no start condition has returned as many on the list indicated other sources of the problem.
> 
> I have discovered high resistance and no voltage on the battery cable connector to starter solenoid.  So, I am replacing the original cable with a new one.  
> 
> Can anyone tell me what gauge and length the cable is from the battery to the starter solenoid? 
> 
> I will use the solder on type of connectors at both ends to try and eliminate corrosion inside the connectors.
> 
> Thanks for the help,
> 
> Fred
> 66 BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/healeys
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/linwoodrose@mac.com
>