[Healeys] Dash Light Question

gablegerry at netscape.net gablegerry at netscape.net
Fri Mar 16 11:37:22 MDT 2018

I recently tackled rewiring my dash with the help of sever of this listers. Thank you so very much. Two questions remain.  
1. The green light at the top of the dash has a plastic tub to connect into.  The wire harness has a multi-grip connector like the lights in the speedo and tack instruments and therefore no gripping ability to the green tube and no ground.  What am I missing?
2. The wire harness also does not have the wire or bulb holder to connect to the two smaller instruments for illumination.  What do I need and how do I wire these in?
On another note.  Can someone recommend where I can get the two cup like objects that hold the top in place while stored in the car on a BN-6.  I had them and can not find them-a real mystery.
Lastly, How are the seat slides replaced in the car.  The wood base  holes don.t line up with anything and don't tighten up without washers.  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20180316/938dfc77/attachment.html>

More information about the Healeys mailing list