[Healeys] cable

John Spaur jmsdarch at sbcglobal.net
Mon May 29 11:20:09 MDT 2017

They would damage the speedo bearing which freeze and cause the angle drive to break. Angle drives can be repaired by removing the metal disks and shaping a short piece of speedo cable to replace the broken one.


John Spaur


From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Bob Spidell
Sent: Monday, May 29, 2017 6:47 AM
To: healeys at autox.team.net
Subject: Re: [Healeys] cable

There were some defective cables going around a few years ago but, IIRC, they were a bit too long at the speedo end and damaged the speedo.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20170529/06de0287/attachment.html>

More information about the Healeys mailing list