[Healeys] Coil Holding Strap Thingy

[Bob Spidell]

Not sure I understand the question, but, you want the coil to perch 
more-or-less right on top of the generator.  Here's a photo of my BJ8's 
installation; not sure if it's exactly right as the rebuilder had to 
remove the strap to work on the generator, but I think it's close.  The 
coil is just a wee bit off exactly vertical, away from the engine, but 
I'm not going to remove the generator to 'fix' it, and it makes it a bit 
easier to access the #1 plug.

Bob


On 5/19/2017 11:34 PM, Patrick & Caroline Quinn wrote:
>
> G’day
>
> Simple question.
>
> I have just refitted the generator to the BN3 and now wondering if the 
> six-cylinder coil holding strap thingy should have its join closer to 
> the engine side or the other side.
>
> Thanks
>
> Patrick Quinn
>
> Blue Mountains, Australia
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20170520/687c8553/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Generator.JPG
Type: image/jpeg
Size: 120403 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20170520/687c8553/attachment.jpe>