[Healeys] Phenolic spacers
rchaskell at earthlink.net
Sat Mar 25 05:48:07 MDT 2017
The the phenolic spacers are insulators. On other cars they would be
installed between the manifold and the heat shield and/or the heat
shield and the carbs.
But these match the CAB side of the carb body, not the manifold side?
Not much help, sorry.
AHCA 3000 MkI registrar
On 03/24/2017 10:40 PM, Michael Oritt wrote:
> I am reinstalling the H6 carbs after rebuilding them and I hope to wrap
> up everything tomorrow. The Moss kit came with two phenolic spacers
> about 3/8" thick that mount to the outer face of the carburetor bodies,
> assumedly between the face and the air cleaners.
> My car is a Le Mans and cold air box was mounted directly to the carbs
> without any blocks. Using them would make it just that much more
> difficult to get the cold air box and the hose and hose adaptor in
> place. It would also result in the fuel bowl overflow tubes not reaching
> the grommeted holes in the box.
> What function do the blocks serve, are they normally found when CAB's
> are mounted (as opposed to air cleaners) and if so what harm might be
> caused by not using them?
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Healeys at autox.team.net
> Unsubscribe/Manage: http://firstname.lastname@example.org
More information about the Healeys