[Healeys] Distributor cap wiring

[Alan Seigrist]

If you want to change the orientation of the distributor, you have to
remove the distributor from the engine, pull the drive dog out (you cad do
it with your finger usually), and reset the dog back in the engine in the
correct orientation.  Make note of the orientation.

If you look in the factory workshop manual, it tells you how to set the dog
into the "22" position, to orient the dizzy correctly.  There's actually a
picture of what the dog position should look like.

On Thu, Jun 1, 2017 at 10:45 AM, Stephen Hutchings <s.hutchings at rogers.com>
wrote:

> I've come to realize that my cap was rotated and re-wired in the dim past
> for some reason.
> That is to say, all the cylinders fire in the correct order, and when they
> should, but it's not in its original orientation.
> I would like to return it to the correct position, and re-wire the cap.
> It seems to me that the cap should have been wired as in the attached
> diagram...can someone confirm this for me please?
> Thanks,
> Stephen, BJ8
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/healeys/healey.nut at gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20170601/84eb7422/attachment.html>