[Healeys] WTB BJ8 rear end housing

Michael Salter michaelsalter at gmail.com
Sat Feb 4 21:57:47 MST 2017

Hi Wayne,
We bent a BN1 housing whilst crossing a roadside ditch in Targa
Newfoundland. (Slight navigation error)
The guys at the local truck garage straightened it for us using a giant
press and a massive rosebud oxyacetelene torch while Michael Oritt and I
watched. We were amazed at how much force it took to do the job so be
Michael S

On Feb 5, 2017 3:35 PM, "Wayne" <waschu2 at gmail.com> wrote:

> Hello,
>           I have a 1967 Healey with bent rear axle tubes. While
> investigating an axle leak it became apparent something more serious then a
> bad seal or gasket was going on.   At a minimum I just need the late style
> rear end housing,  but  I might be interested in a complete assembly if
> someone has one for sale and does not want to disassemble it.  I live in
> Western Ct.  The plan is to try and straighten mine at a later date and not
> have the car apart any longer then necessary.  The bare housing is pretty
> light and can be shipped.  If someone has a complete assembly and not to
> far from Ct. I have a truck that I could use to pick it up with.   Picture
> are nice if you have one for sale.
> Thanks
>   Wayne
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/healeys/michaelsalter at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20170204/d638f2e3/attachment.html>

More information about the Healeys mailing list