[Healeys] Replace seal in speedo adapter

[Peter & Veronica]

....if it ain't broke.....

From: Bob Spidell 
Sent: Sunday, December 24, 2017 7:22 AM
To: healeys 
Subject: [Healeys] Replace seal in speedo adapter

Merry Christmas--or whatever!--Listers.




I have my speedo adapter out on the bench and figured it would be a good time to replace the O-ring and seal; however, the seal is buried inside the adapter and it too big to be replaced in the usual fashion.  It appears the adapter is a 2-piece unit, with a smaller part--with the threads for the angle drive--inside the 'barrel.'  It should come apart, but for a small pin that holds the parts together (see attached photo).  Anybody know how to separate the two; hopefully, so they can be rejoined?




TIA,


Bob


--------------------------------
Bob Spidell - San Jose, CA



--------------------------------------------------------------------------------
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/greylinn@ozemail.com.au

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20171224/41bbd89a/attachment.html>