[Healeys] Replace seal in speedo adapter

[Bob Spidell]

Merry Christmas--or whatever!--Listers.


I have my speedo adapter out on the bench and figured it would be a good time to replace the O-ring and seal; however, the seal is buried inside the adapter and it too big to be replaced in the usual fashion.  It appears the adapter is a 2-piece unit, with a smaller part--with the threads for the angle drive--inside the 'barrel.'  It should come apart, but for a small pin that holds the parts together (see attached photo).  Anybody know how to separate the two; hopefully, so they can be rejoined?


TIA,

Bob

--------------------------------
Bob Spidell - San Jose, CA
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20171223/f352990b/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: SpeedoDrive.JPG
Type: image/jpeg
Size: 32662 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20171223/f352990b/attachment.jpe>