[Healeys] Tool for removing SU carbs

[Oudesluys]

Any decent tool store will have a collection of various sizes of this 
wrench in closed ended form, it is called a starter wrench around here. 
It is easy enough to grind the slot in one end.
Kees Oudesluijs


Op 24-8-2017 om 23:13 schreef Bob Simmen:
>
> Having just received the Sept. 2017 issue of Healey Marque Magazine, I 
> quickly read the Technical Service Bulletin article Big Healey, Big 
> Carburetors.  I will be mounting my rebuilt carbs in the next week or 
> two.  On page 39 it show a picture of “Special tools required for nut 
> removal” (see attached).  Although I have a large supply of the tool 
> on the left, and the tool on the right is always on my workbench, I am 
> in desperate of need of the tool in the middle.  Does anyone have a 
> part number and source that I might be able to purchase this wrench.
>
> Thanks in advance for your help.
>
> Bob
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20170825/876533a9/attachment.html>