[Healeys] Tool for removing SU carbs
bspidell at comcast.net
Fri Aug 25 16:46:39 MDT 2017
Why grind a slot in the end? I can see grinding the whole box end down,
but there's no cables or wires to circumvent.
On 8/25/2017 12:33 AM, Oudesluys wrote:
> Any decent tool store will have a collection of various sizes of this
> wrench in closed ended form, it is called a starter wrench around
> here. It is easy enough to grind the slot in one end.
> Kees Oudesluijs
> Op 24-8-2017 om 23:13 schreef Bob Simmen:
>> Having just received the Sept. 2017 issue of Healey Marque Magazine,
>> I quickly read the Technical Service Bulletin article Big Healey, Big
>> Carburetors. I will be mounting my rebuilt carbs in the next week or
>> two. On page 39 it show a picture of “Special tools required for nut
>> removal” (see attached). Although I have a large supply of the tool
>> on the left, and the tool on the right is always on my workbench, I
>> am in desperate of need of the tool in the middle. Does anyone have
>> a part number and source that I might be able to purchase this wrench.
>> Thanks in advance for your help.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Healeys