[Healeys] That Elusive Screw

David Nock healeydoc at gmail.com
Fri Jun 24 09:23:08 MDT 2016

I have checked all the screws, knobs and bolts that we have and they are correct. Except for the bolt there are 2 different suppliers of these, one has a left handed thread and the other has a right handed thread. 

The screw heads on the left handed screws we have in stock will not go thru the knurled knob that we have in stock.

Where did you get the bolt and knob?

Screw head measures 0.381 OD  Knob 0.270 ID

David Nock
healeydoc at sbcglobal.net
209 948 8767

From: rrengineer.mike 
Sent: Friday, June 24, 2016 3:56 AM
To: healeys at autox.team.net 
Subject: [Healeys] That Elusive Screw

Has anyone found a source for the screw for the shaft in the center of the windshield knurled nut?  The new windshield setup I bought for some reason came without the screw. I don't want to buy a new knurled nut and shaft to get two screws. The two screws that our friends in Stockton sent me are not the same thread as the hole in the shaft. The head on the screw also passes right through the hole in the knurled nut making it useless even if it did fit the threaded hole.  It might be my shaft has the wrong thread, but I would think not since it is a replacement part.  Can someone at least tell me what thread size that screw might be?
Mike MacLean

Sent via the Samsung GALAXY S® 5, an AT&T 4G LTE smartphone

Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healeydoc@gmail.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20160624/a014a6ff/attachment.html>

More information about the Healeys mailing list