[Healeys] Core plug extraction

[Bluehealey]

Trying to open a lip as you describe sounds tricky with the potential for
gouging the wall of the plug opening.  I just drive a spike through the
centre and lever out the plug. They are quite soft, compared to cast iron,
and it has never presented a problem.

 

What tricks do others have?

 

Alan Bromfield

Modified BN4

Work in Progress AN5



 

From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Simon
Lachlan
Sent: 12 November 2015 15:15
To: 'healeys'
Subject: [Healeys] Core plug extraction

 

I noted the other day what a ghastly job that is. Always possible and nearly
always bl**dy awkward.

I've seen clips of guys - always with the engine in pieces on the bench -
who just bang one lip inwards until the plug swivels in the hole. Then they
just grab it with a mole(?!) wrench or similar and hoik it out. So easy.

I love my car dearly but I always expect the most cussed things of it and
I'm seldom disappointed. Surely if I were to bang in those that I could
reach, they'd just vanish inside, never to be seen again???

Simon

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20151112/c9e6af04/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 14962 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20151112/c9e6af04/attachment.png>