[Healeys] Smiths Speedometer Question

[Bob Spidell]

The reset shaft/knob hole should be sealed with a spring, a small, thin metal washer and a felt washer. If you enlarge the hole too much these might poke through. 

Bob 

----- Original Message -----

From: "Don Hardie" <healeynut2 at hotmail.com> 
To: "Laurie Wilford" <healeymk3 at hotmail.com>, gturl at sympatico.ca, "Autox.team.net" <healeys at autox.team.net> 
Sent: Saturday, March 14, 2015 6:27:11 PM 
Subject: Re: [Healeys] Smiths Speedometer Question 

Or elongate the hole in the case. 

Don Hardie 
BN1 
OZ 


Date: Sat, 14 Mar 2015 10:29:12 -0400 
From: healeymk3 at hotmail.com 
To: gturl at sympatico.ca; healeys at autox.team.net 
Subject: Re: [Healeys] Smiths Speedometer Question 

Although you can pull the speedo apart with the trip lever on and the face attached, the correct way is to carefully remove the needle and the face. You must do this to put the speedo back together. 

Laurie 




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20150315/0b1dc036/attachment.html>